Post for Komo Metal cutting Router with Fanuc OM control

[KMI]

Hello,

 

Just recieved a new toy and I'm looking for a post. Any suggestions. The Komo rep said that there may be other Komo users that use mastercam and that may be the best place to look.

 

Daryle

[Mark H]

Actually the best place ask is your Mastercam resellerdealer.

[Flycut]

look here

[KMI]

Hello,

 

I will talk to them as well. I am a registered user and have had mastercam for a long time. My question was really put out there to try to find other people with Komo routers so that I can have the post built properly. Our machine has 6 spindles on it and there may be someone else out there that has some input on how it should work with Mastercam. No help from the forum, no problem. I will see if the reseller can sort it out.

[connormac]

quote:

---

No help from the forum, no problem.

---

Sorry, you didn't ask for help. You asked for a post. And if you would have read the "Forum FAQ" you would have known that is a NO-NO. Anyone here will help you with a problem with a post.

Just no gimmies!!