mouse scroll

[smokey_44]

Does V9.0 have wheel mouse zoom support ? or do I have to use 9.1 ? I can't remember ? Is there a file ? or setting ...just can't remember.

 

 

Dave Ferraro

[kinglouie V]

mmouse came out for 9.1 I think, but it may work on 9. look on ftp/c-hooks.

[Kannon]

prolly get it from here...

 

Bryans Chooks

[Thad]

I've lost track of what versions came out with what over the years.

 

While you're at it, don't forget the McUtils chook. That will allow for dynamic rotate by clicking and dragging the scroll wheel. I'm pretty sure dynamic zoom on the scroll wheel came out with V9.1.

 

If you're using V9, why wouldn't you go up to 9.1? I think that's also when the extend/shorten options started in the leadin/out page.

 

I haven't seen you around in a while, Dave. I hope all is well.

 

Thad

[smokey_44]

Ya I tried the chooks page and downloaded the MMmouse chook ,It doesn't work for v9.0 ,I gues I will have to find the v9.1 disk.

 

 

Ya Thad I haven't been around for a while just really busy with work and family stuff (My daugher is goin back to sick kids on and off so I haven't had much time lately) Its really nice to be back ,even if it is just for a minute...Miss all of you

 

 

Dave Ferraro

 

Dave Ferraro

[kinglouie V]

DAVE,

 

are you running the multirun.dll (c-hook) I was thinkin' maybe you needed to install that one and specify mmouse and the McUtilities. Thad? ring any bells? I don't know if that will have any bearing at all on if it will run in 9.

[Thad]

Lou,

 

I never used mmouse before.

 

We used to use McUtils as the startup chook so it was active when MC was launched.

 

Thad

[kinglouie V]

multirun was my startup in 9.1

maybe Dave will let us know if it worked?

[BernieT]

Bryan's mmouse c-hook only worked with ver 9.1

 

Definitely go with 9.1 sp2, many improvements over 9.0

[cadcam]

the one you want is on my web downloads.

 

http://www.ppcadcam.com/html/downloads.html

 

This give you Dynamic Spin and zoom.

[smokey_44]

I tried the MMOUSE chook ,didn't work on v9.0 , I guess I get off my butt and find that 9.1 disk...

 

 

Cadcam From Cad/Cam Consulting - I tried to goto that page but it just doesn't work for me.

 

 

Thanks for all of the replys and responses guys I do appricate them, Thanks

 

Dave Ferraro