Backplotting Edited Toolpaths?

[peon]

I can't seem to backplot a Surface Leftover toolpath after I edited it in the Toolpath Editor. Is this actually possible?

[peon]

I can't verify the toolpath either.

[Roger Martin from CNC Software]

Should be...

 

Please submit your file to [email protected]

so that they can investigate.

 

Thanks fgor your input!

[edmBosto]

Matt,

After you click on the backplot icon, click on the 2 arrows on the upper left of the drop down,

then click on the + sign and there should be some paths shown. If not something is wrong with your parameters and the tpath will not generate.

[peon]

Yep, the path is shown when I look in the spot edmbosto. But when I click "play", nothing happens.

I added the file to our ftp site.

 

ftp://24.123.83.50/YAMA/

 

11352_B_MAIN_HANDLE_LOWER.MCX

 

Roger, I sent qc an email with the ftp addy. Thanks!

[Thad]

I got an error trying to access your FTP. No permission?

 

If you look in the toolpath manager, what size (kb) does it say in the last line if you expand that operation? Perhaps you edited too much and there's nothing left of the toolpath, therefore there's nothing to backplot/verify. I've done that before.

 

Thad

[peon]

Hello Thad. It shows 5373.5K. Hmmm... I checked the ftp sight from my tube at home and everything seems kosher.

[Thad]

I still get the FTP error. Without seeing the file, I'm out of suggestions.

 

Thad

[b_daddy]

Matt,

 

I get the same error as Thad. Can you put in on the ftp site here?

[peon]

I added the file 11352_B_MAIN_HANDLE_LOWER.MCX

to this forums ftp site in the MCX folder for review if anyone has time to look at it. Thanks! -Matt

[Thad]

It's a good idea to zip a 158MB file.

 

Thad

[peon]

Oh, sorry bout that. Thanks for the advice. I'll do that next time.