Extend lead in/out

[jeff]

I'm at home for the day, but earlier I couldn't get my lead ins/outs to extend by any amount.

Was just using a single line contour (no real shape just a straight line) and Mcam wouldn't extend my leads.

Any thoughts?

Thanks.

[Lee.]

Your Icon says X and your profile says 9 which program are you running.

 

Thanks.

[Hardmill]

quote:

---

Your Icon says X and your profile says 9 which program are you running.

---

Hes using paintbrush

 

PEACE

[Guest]

Jeff,

 

I use extend and shorten all the time, I have not seen this behavior previously.

 

Can you share your file?

[Hardmill]

quote:

---

Was just using a single line contour (no real shape just a straight line) and Mcam wouldn't extend my leads.

---

Acts like its supposed to here

 

 

PEACE

[jeff]

quote:

---

Your Icon says X and your profile says 9 which program are you running.

---

LOL I know what you're getting at Lee, I read your previous thread.

I picked the Mill icon not the X icon.

 

Also at the end of my siggy,(under the stupid OSU pic) is my current version.... v9

[jeff]

John,

Im at home right now, I'll take another look at it in the morning, im sure i have something not right because I've had this working many times before.

[b_daddy]

Jeff,

Can you make that thing a little smaller, it is way to hard on the eyes.

 

As for your lead in/out, works here.

[jeff]

quote:

---

Can you make that thing a little smaller, it is way to hard on the eyes.

---

Oh how I wish!!!

 

I just tried it again and the extend lead in/out works fine now.

 

Musta been a glitch.

 

Thanks for letting me waste all your time guys.

[Hardmill]

quote:

---

Thanks for letting me waste all your time guys.

---

Anytime :SMACK:

 

 

PEACE