zoller saturn 2 vers mastercam x2

[Pascal Dubois]

Je voudrais savoir si quelqu'un a deja transferer des informations d'outils mesuré sur un zoller presetter vers mastercam x2.

[Hardmill]

YO QUIERO TACO BELL ??

 

 

PEACE

[Todd Tracey from Fastech]

Can you try again in English? Most of us here don't speak French. Sorry

[JohnW@Kauffman]

If BabelFish is correct, he said:

 

quote:

---

I would like to know if somebody has already transferer information of tools measured on a zoller presetter towards mastercam x2.

---

[3R!< W3NG3R]

I had my wife translate and yes John, that is what it said. I just do not have an answer to the question. If anyone posts an answer, I could translate it to French, or the BabelFIsh seems to work good.

[?Mark]

BabelFish is having problems translating Hardmills French, any one care to clue me in on what he said?...

[3R!< W3NG3R]

hardmill was being funny (and it was in spanish)

[?Mark]

LOL @ Eric

I was just having fun...

[3R!< W3NG3R]

Hey, no one likes to be laughed at!

 

[?Mark]

[Guest]

quote:

---

Hey, no one likes to be laughed at!

---

Storkman lives to be laughed at

 

[Hardmill]

quote:

---

Storkman lives to be laughed at

---

 

BTW Where is that pinhead ??

 

 

PEACE

[Pascal Dubois]

My question does not have a relationship with babelfish. If you are not enough wily to translate what I say, I then will ask it in English.

 

I would like to know if somebody has already transfert information of tools measured on a zoller presetter towards mastercam x2.

[TSPLINE]

WOOD 27 We use both a zoller presetter and Mastercam all are tools have been drawn up in Mastercam and we have a text file describing the tool in zoller we treat them diffrent.Are set up people pull up the zoller file and we have a ID number and description when they measure the tool the appropriate offsets are put in. We have a catalog of over 450 tools we each took turns at working on the library we have 4 programmers here and it took about 3 months.