ok guys finishing up tweaks on okuma master post question

[cadmonster66]

here is a sample of equation for for tool call out

IF[ VNTOL EQ1 ] N100 psof ptlchg_com

here is the code for my post

"IF[","VNTOL EQ", *t,"]", *n, e

what I need is

IF[ VNTOL EQ 1 ] N100

I need the space between EQ and the number 1 how can i get that space

thx

John

ohhhhhhh yeah if ya don't remember still v9

[gcode]

"IF[","VNTOL EQ ", *t,"]", *n, e

add a space between the Q and the " ????

 

quote:

---

ohhhhhhh yeah if ya don't remember still v9

---

thats gotta suck

[cadmonster66]

see how in the first output the EQ and 1 are right next to each other EQ1 and need it to look like this

EQ 1

there is a space in the second 1 between the EQ and 1

john

OHHHHH yeah by the way sure does Code still couple guys around here i know still in V5 if you can even remember thatttttttt whewwwwwww but atleast not to many shops around here are vX more toward NYC and Conn for that

[Guest]

code:

---

"IF[","VNTOL EQ", "", *t,"]", *n, e

---

Thry the double quotes like that

[cadmonster66]

John,

That didn't do a thing . I can't remember did we use some kind of font or something like that to accomplish almost the same thing . I tried doing a search but could not find out what we used or did . I know it was like in the last couple months we used that

thx

John

[Greg Williams]

Okuma Spindle Tool Fix Try this

[Mick]

"IF[","VNTOL EQ", " ", *t,"]", *n, e

 

Try the space between the quotation marks, and that should work.

[cadmonster66]

Mick,

Thx little late lololololol told John bout that yesterday lloolol that's what it needs is the space. You know how the post xxxxe can be lolololo

thx

John

[Mick]

What kind of Okuma are you programming?

 

I've programmed LS-N's (OSP2200L and OSP3000L), LB's (OSP5020L, OSP7000L, U100L and E100L), MC5VA (OSP5000M-G), MX55VB (U100L), MB56VA (E100L), etc etc. Nice machines

[cadmonster66]

Mick,

they have 2 4020's

just got a MA-550v also they have the 56V

loveeeeeeeee them all only draw back I'm over six foot so things can get little cramped when i have to go in the 4020's lolololol

John

[Post dept]

Cadmonster66,

 

Are you using mpmaster_okuma?

 

It's a free post that has everything in it for the Okumas and it's already done.

[gms1]

quote:

---

Cadmonster66,

 

Are you using mpmaster_okuma?

 

It's a free post that has everything in it for the Okumas and it's already done.

---

Where is this post?