dockable tool ops manager

[Camdude®]

justloaded mr2 and discovered the dockable tool ops manager, SSSSWWWWWEEEETTTT!!!

my backplot got a little funky but i guess i just need to reset my config page.

 

BTW, i don't update my config from old to new i redo it, is that really necessary , i remember having trouble updating configs in previuos versions.

[Tim Pruett]

my backplot is real slow. I checked the config and it looks like it's the same as mr1.

[Michael Sullivan]

Backplot Slooooooooooooooow here too.

[dan m]

backplot slow here also. I allow mc to update my files automaticlly and havn't had a problem yet

[Jamie Betz from InterTech Supplies]

I've been just copying my config files from the old version and putting them in the new version and haven't had any problems.

[Randy Morton @ Clem Industrial]

My backplot speeds vary (at 100%) between lathe and mill. Lathe I get really fast (most of the time) and mill is a lot slower...?

[Thad]

quote:

---

I've been just copying my config files from the old version and putting them in the new version and haven't had any problems.

---

I would advise against that, Jamie. As new features are added to MC, the config file can change with it. Using old config files that don't know about those changes could cause problems. If you haven't had any problems, I think you've been very lucky.

 

Thad