Today many X2 MR2 crashes various reasons

[Thee Rickster ™]

I try to expand a toolgroup(unhandled exception/

shutdown)

 

I post a tool path,3rd one in that file, control

def is missing all of a sudden. reload def/crashed

 

Try to regenerate a dirty path...MC blinked off.

 

Merge data into file... Blinked off

 

(A few others that I cannot recall)

 

I have restarted MC x2mr2 9 times today. I have had good success up to this point.(started

counting after the 3rd one)

 

No new updates or install recently either.

 

Has any one been getting any of these random

crashes?

 

Rick

[John13]

I had 1 freeze today when trying to use Arc Multi Edit CHOOK. I'm not sure if it's the latest, but it was in the chook folder, it changed all the arcs but I could not get rid of the window and had to restart mcam. Other than that, no problems

[Thee Rickster ™]

Could importing tool paths from X2 SP1 into MR2

be an issue?

 

I only had one crash all week.

 

I am thinking it a ops manager issue

also I cannot get the project manager to remember

anything twice in a row?

 

Also I had not rebooted yet today

(teh fix all try)

 

Lets see if that helps

[gms1]

I can never wait long enough for the backplot window to fully load before I press S for step. So, I get quite a few crashes daily.

I need some ridilin or less stress or something

[Greg_J]

I find its the ops manager, if I click on a parameters of a program and it does nothing, it's gonna crash. I haven't had it crash on me in awhile (knock on wood). Some days it crashes once or and some times it has crashed up to 10 or so times. It was worse with MR1.

 

Greg

[Guest CNC Apps Guy 1]

So far so god for me using a Dual Monitor Setup with the OPS Manager undocked on the other monitor and the Levels manager open constantly.

[Thee Rickster ™]

Greg,( I went from X2 to MR2)

I click on geometry to reselect and it does not

take, it just flashes blue, then I have no choice

but to close MC and start again.

 

James,

I am doing exactly the same, setup an all,

it has only been today with the multiple crashes.

 

I took the file home and worked for 2 hours flawless.

(quad 4 at home 1 monitor)

 

when I get to work tomorrow I am going to reboot

before I start my day. It used to be the only

reliable fix for X2 before X2 SP1 came out.

 

(I am not giving up, i won't go back to S2 sp1.

That not the reason I purchased the maintenance.)

 

Rick

[Guest]

When you guys get the "When I click on parameters crash"

 

Do this.

 

Reopen the file, do a "Save As", pick a different name and reload your machine definition into the new file.

 

See if that helps.

[Thee Rickster ™]

John,

 

I had to do similar to that to get a path to post.

(minus the save as)

It actually told me what to do step by step.

i lost my def, and it told me so...lol

[gcode]

quote:

---

I am going to reboot

before I start my day.

---

I shut my box off at night so I'm starting fresh

in the morning. I usually reboot at least once a day if the files I'm working on have lots of toolpaths or large solid models.

I don't remeber the last time I had a crash with X2_MR2

[FLIPPER™]

I was getting the same kinds of problems until I figured it out, that it was my file and the solid in it was corrupt.

[Thee Rickster ™]

Not one crash or lock up today!!

 

I think a re-boot in teh mornin' is the

thing to do daily.

 

Rick

[Guest CNC Apps Guy 1]

Yes, I ALWAYS reboot. Not because I have to but I don't see any real need for my computer to be running if I'm not using it. Less energy consumption less $$ out the door.

 

JM2C