Pocket/Path ??

[FAS]

Looking for help getting the path(s) I want for a simple pocket. It's an open faced pocket with the back wall having a 10 degree taper from floor to top. Side walls are perp to the floor with .125 fillet rads, using a .25 ball to finish. After roughing out the center mt'l I would like to waterline the sidewalls and the back wall from top to bottom. Problem I'm having is all paths I've tried won't cut the sidewalls, just the back tapered wall. Any help would be greatly appreciated.

 

 

Thank you for your time.

[Hardmill]

You try surf contour or flowline ??

Send me your file.

 

 

PEACE

[Hardmill]

This was with Surf-contour:

 

 

PEACE

[FAS]

That's what I'm look for. I'll lose the fillets.

[FAS]

Killed the containment boundary and all is well.

Thanks for the quick help.

 

FAS

[Hardmill]

Mail back at ya

 

 

PEACE

[crazy^millman]

Surface finish flowline in a one way direction will do the same thing. Also no need for boundaries.

 

HTH