Mastercam Demo Part - Video

[88Matt]

Very sweet demo Greg.

 

What kind of rpm can you get on that rotary? Would you mind sharing a little code using the turning tool?

 

Thanks for sharing. Great video!!!

[mig]

I love Okuma ,using this brend for 15 years .

But I would like to see how this babe cutting steel , not the air .

[Greg Williams]

Matt,

 

quote:

---

What kind of rpm can you get on that rotary

---

The turning spindle is max 1000RPM.

 

A snippet of the code is below, The whole program can be found Here

 

 

(TOOL - 2 OFFSET - 1002)

(PDJNR 2525K 15 - R12 INSERT - DNMG 15 06 12)

(LEFT TURRET OP)

( FINISHING OD A-90 )

N7 G116 T2

G0 Z888

M19 RS=180 (-Y CUTTING)

G0 X0 Y-888

A-90

CALL OO88 PX=VC10 PY=VC11 PZ=VC12 PA=-90. PC=0. PH=5 PP=10

G19

M508

G431 Z1 (TURNING MODE ON Z DIA)

G433 H1002 Y1

M540

G197 SB=188 M504

G0 Y-300.

Z600.

G0 Z500. Y232.414 M339

G196 Z1 SB=295

Y232.

Z381.6

G95 G1 Y230. F.2

G03 Z390. Y225.8 R4.2

G1 Y211.8

G03 Z388.875 Y209.7 R4.2

G1 Z357.012 Y182.106

Z350.793 Y146.567

G02 Z350.764 Y146.236 R3.8

Z357.045 Y142.494 R3.8

G1 Z375.904 Y140.831

G03 Z385.267 Y137.024 R6.2

Z394.195 Y113.8 R62.64

Z385.267 Y90.576 R62.64

Z384.489 Y89.775 R6.2

G1 Z351.031 Y60.799

Z384.045 Y32.208

G03 Z385.706 Y29.108 R6.2

Z384.045 Y26.008 R6.2

G1 Z381.545 Y23.842

Z384.374 Y22.428

G0 Z500.

Y-20.

M09

G197 SB=188

G0 Y-300.

G0 Z888

M505

G432

M509

G15 H5

M01

 

We will run this demo part again in Adelaide in a few weeks. I will get some actual cutting video then and add it to youtube

 

[ 04-09-2009, 08:13 PM: Message edited by: Greg Williams ]

[Greg Williams]

Another demo part

 

[Müřlıń®]

quote:

---

I can hear some of the old school guys crying how they could do it faster setting it up 20 times

---

I would only need to set it up 10 times....

 

Nice vids greg