Advanced Training Classes

[Toonz]

Can anyone tell me if there are any X3 advanced traing classes offered anywhere? My local MC Dealer only offers basic.

 

I've been usuing MC for more than 2 years now. I have no problem with the basics and even some of the advanced features, but I'm sure there is a lot more I can do. Looking for someone who can show me first hand how to use some of the different commands, tips, tricks, shortcuts, etc....

[veritasproject]

where are you located? ntma in ca has some advanced class for mastercam

[Mike S @ S4A]

We're in Sterling, MA 45 min. NW of Boston...

[Rob @ Target Machine]

Maybe here

 

http://www.northtown.net/mastercam01.html

 

or if you can take a couple weeks off to go here, you will get a level II NOCTI Cert.

More 4,5, and 3+2 in this course.

If I had the time, I'd go.

 

http://www.ivytech.edu/actnow/Manufacturin...cam-certII.html

 

[ 04-17-2009, 10:12 AM: Message edited by: mastercamguru ]

[Dave Miller]

Toonz,

Over at Shopware Inc in IL we do offer a wide variety of basic and advanced training classes or can even do custom training to your individual needs.

 

What type of stuff are you looking to go over.

Feel free to call our office and talk to me if you are interested.

(888) 222-7126

[Scott Lundin Shopware Inc.]

Toonz,

 

Dave beat me to it. Let us know exactly what you are looking for and we can probably put something together for you.

[Scott Lundin Shopware Inc.]

Here is a link to our training classes and schedules at the Elgin office: Shopware Training Schedule

[Eric Witthus Prototek Engineering]

Toonz,

 

Prototek Engineering offers custom 1 on 1 training. We can cover any Mastercam topic you're interested in. We are located in the Twin Cities. Feel free to email me for more info.

[Roger Peterson]

Toonz, your dealer is either Prototek or Shopware, both offer whatever training you need, contact your dealer and they will be able to take care of you.

 

 

Regards,

[shazam/TPP]

check here

[DODGERFAN]

NTMA HAS ADVANCED CLASSES IF YOU HAVE ONE NEAR YOU

[Code_Breaker]

FYI ...

 

I am teaching both the Basic and Advance Mastercam at NTMA in Ontario, CA ... real fun since all the old curriculum has disappeared ...

[DODGERFAN]

WHAT IS THE NEW CURRICULUM LIKE

[Ron Branch @ 5th Axis]

DogerFan Caps is considered Yelling

[DODGERFAN]

good tip mr. b