Very Cool

[X-L Engineering Corp]

Just thought you guys might be interested.

 

code:

---

www.schunk.com/schunk_files/attachments/CAT_40_PZNplus_US.pdf

---

[Philcott]

Ted.

 

Thought I would help you out with linking to your link.

 

 

Ted's link

[X-L Engineering Corp]

Thanks I need all tha help I can get.

[Dave.L]

Extremely cool....BUT....Chip control between the parts and the workholding would be a real issue.

[Mic6]

That's where the chip fan comes in

[X-L Engineering Corp]

Where’s the link to that?

[GoetzInd]

Those thinks sound like a 747 spooling up on the tarmac. We uses to have a couple. Just get HP coolant. Less noise.

[35K chipper]

i wonder how that chip fan sounds at 35,000 rpm's.

 

35k

[Dave.L]

We have one of those, about $200 bucks and the fins wear out from the chips over time. It does work well, but not well enough for part auto-loading. Just saves the operator blowing off the parts and getting chips all over the place.

 

BTW, it does sound like a 747

[Dave.L]

BTW, it's sold by Big Kaiser

[gms1]

We had the model of those fans prior to the one shown in the picture. Terrible things those are! Extremely loud, wear out fast from steel chips, and tore the paint off the inside of our machines from the chips flying around. Was funny watching it work though

[Dave.L]

quote:

---

Extremely loud, wear out fast from steel chips, and tore the paint off the inside of our machines from the chips flying around.

---

Yes, but they do work