I want to modify my Mazak post to work correctly.

[Jeff2005]

I want someone to help me with my Mazak post for X4 it is giving me errors. It is too many for me to fix. I ask my reseller but haven't had any luck. If someone would be willing to look at it send an email to me.

 

Thanks,

Jeff

[Jeff2005]

Would someone at least tell me something. I NEED HELP.

[Mr. M]

I would contact InHouse or at least tell us which post it is/what machine its for.

[Dave.L]

you have mail

[gcode]

what sort of errors are you having..

[Jeff Fritsch]

Hi Jeff2005,

 

if you do have any type of errors with an In-House post, do not hesitate to contact us at

 

[email protected]

[Joe788]

Jeff, what machine, what post, and what kind of problems are you having?

[Mcam Nut]

MP master post works great on mazaks, what type of machines do you have?

[Rob @ Target Machine]

Jeff - It looks like updatepost.dll made a mess of things here. Are you sure you picked the right previous version (X3) when you ran the dll?

 

I would start by reading John's Sticky and running the dll again making sure to choose the correct source version.

 

If you still have no luck, I can rebuild the missing logic, but I would need a copy of the X3 post to do so.

[Rob @ Target Machine]

Jeff - I got rid of the errors in the .err file, but you should really have CNC, IHS, or your local reseller take a look at the post for you.

 

Someone has cut and pasted code from the Mpmaster or another similar post without declaring the variables/strings used nor paid any attention to the postblocks being called or the logic behind the code.

 

I would be very careful until it has been checked by a reseller and take action to see that it isn't modified again without good reason and a qualified person to do so.

 

I, in all honesty, have never seen a post with so many mistakes.

 

I hope you get this resolved before a mistake costs you a spindle or an expensive part.

 

BTW - You have mail.

[Colin Gilchrist]

I have a rock solid post for a Mazak mill that was developed from MPMaster. Email me if you would like a copy...

[Joe788]

Email sent, Colin.

[Jeff2005]

Yes sorry for the delay in response to everyone. I have been in touch with Robert Perkins and he has been gracious enough to help me. I am trying the post he looked at and he said as you can see it still has some errors but I tried it and it did post it. I will keep in touch.

[Jeff2005]

The Machine we have is a Mazak Fusion 640M

[Rob @ Target Machine]

Jeff - It's good to hear that you're posting ok. I forwarded your email to Colin for you.

 

You probably won't have any serious problems with the post now.

 

I just think someone else should look at it and run through some 4ax parts before we say that it's safe to use again.

 

R.P. aka Guru

[Jeff2005]

Yes that would be a great idea. Thanks.

[Colin Gilchrist]

Joe/Jeff,

 

I've finally gotten my post from home and stuck it on a memory stick. I'll clean it up and send it your way.

[Jeff2005]

Ok Thanks