2nd monitor

[RTcat]

I've decided to move my level manager location on my second monitor. I realize you cannot get it to stick on, but how do I get it to stick to it's new location after I open it. I've tried saving config to no avail. I used to have my Op manager and level manager next to each other and have decided to split them. Hey if the wife can move furniture in the house a guy has every right to move his level manager, right?

 

X4 MU3

[Mcam Nut]

They put the level manager there for a reason, its not meant to be messed with, leave it alone

[kens1]

I have both Op manager and level manager on the 2nd screen, and they always come up in the same location. Have you tried closing MC when they are in the position you want, then reopening MC? I'm not sure what you mean when you say you can't get it to stick on. Mine is on almost all the time.

[Josh Kinney -Elite Engineering]

You need to save your toolbar state.

[Storkman]

quote:

---

They put the level manager there for a reason, its not meant to be messed with, leave it alone

---

[kazmir44]

All you have to do is put it where you want it, then close it with the green check. The next time you open it it should be there.

 

worked for me.

[RTcat]

Thanks everyone! Not sure which one did it but I selected the green check mark and also saved the toolbar state. Now if we can convince CNC to allow us to lock the level manager on.

[Leigh @ Kodiak]

My level manager stays locked open all the time

[RTcat]

Yes mine stays open too within a session of Mcam, but when you first open Mcam you must open the level manager everytime.

[specv]

mine stays open unless you xform something to a new level.