mazak post help

[dan m]

I got a post for our mazak integrex with a t32-3 controller from our m/c dealer and it needs some help. could someone tell me how to get rid of the information on the far right?

 

 

N101 G18 G53 lsof ltlchg 56

M302 lsof pg50call 56

G28 Y0. lsof pg50call 56

G28 U0. W0. lsof pg50call 56

M202 lsof pcaxis_off_l 56

T0101.00 B1 lsof ltlchg 56

G97 S132 M3 lsof p__15:1324 56

G0 X6.3875 Z0. M8 lsof ltlchg 56

G50 S3600 lsof pcssg50 56

G96 S220 M3 lsof pcss 56

G99 G1 X-.0625 F.012 llin plinout 58

G0 Z.1 lrapid prapidout 60

M9 ptoolend pg50call_ret 64

G28 U0. Y0. ptoolend pg50call_ret 64

G28 W0. ptoolend pg50call_ret 64

M5 ptoolend pg50call_ret 64

M01 ptoolend pg50call_ret 64

any help will be appriciated. Thanx in advance.

 

Dan

[M. Anderson]

Try looking in the post (edit it), for "FASTMODE", it should be around the bug1,bug2,Ect switches.

 

See what it is set too and change it to "YES", or "1".

 

That should stop the posting of this info? I think!

 

Mark

[Jack Mitchell]

Dan,

 

Please request the post CD from your reseller - it costs about $25 dollars; or you can download the PDF file after contact for no cost.

 

Regards, Jack

[dan m]

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help.

 

Dan

[dan m]

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help.

 

Dan

[dan m]

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help.

 

Dan

[Marty A]

dan do just work in detroit?.......motty

[chris m]

Is there an echo in here..?

[Jim Evans from CNC Software]

Dan,

 

That extra informaiton you are seeing is fromt he bug switches being active. Bug2, Bug3, and bug4 control this output. For bug2, bug3 and bug4 to work, fastmode should be set to 0 or no.

 

the fastmode line should look like this one to deactive the bug output. You can also set bug2, bug3 and bug4 to zero to shut iut off also.

 

code:

---

fastmode : 1 #Posting speed optimizition

bug1 : 2 #0=No display, 1=Generic list box, 2=Editor

bug2 : 30 #Append postline labels, non-zero is column position?

bug3 : 0 #Append whatline no. to each NC line?

bug4 : 1 #Append NCI line no. to each NC line?

---

I hope this helps!

[dan m]

Chris;

sorry about the echo. The network around here is screwed up and i can't get back on to see what comes through to the message board and what doesn't sometimes.

 

Jim;

thanks for the help. It worked. I'm sure I'll have more questions in the near future.

 

Dan

[dan m]

motty;

 

Yes i work in detroit for a auto supplier.