Solid Layout Drawing

[GibbsMachineCorp]

Hello all. I'm trying to do a Solid Layout Drawing and have it drawn at a custom wcs. It keeps wanting to make the drawing on the Top wcs. I tried using the Change View section on the Solid Drawing Layout page but can't get it to work. Thanks in advance.

 

X5 MU1

[NOTW Programmer]

Hello all. I'm trying to do a Solid Layout Drawing and have it drawn at a custom wcs. It keeps wanting to make the drawing on the Top wcs. I tried using the Change View section on the Solid Drawing Layout page but can't get it to work. Thanks in advance.

 

X5 MU1

Have you tried the remove view, select the view you want to remove; then click on add view and select your custom wcs. Should work no prob, let me if it doesnt; im on my way out but will verify it tomorrow.

 

Regards,

GM

[Pete Rimkus from CNC Software Inc.]

Sorry - it only draws in the true TOP plane...and you're not the first one to ask for this. It's been logged here as an enhancement request.

[crazy^millman]

 

 

No comment.

[GibbsMachineCorp]

Thanks Pete. Looking forward to this enhancement.

[Teh Bear without Brains kinda idiot]

BUt why ?

You put your drawing in top level than xform3d to the other WCS

[LaszloK]

Sometimes I will copy my solid onto another level a postion it specifically for the drawing.

[crazy^millman]

Sometimes I will copy my solid onto another level a postion it specifically for the drawing.

 

With the Integrex you had no choice.