Milltronics postprocessor

[bawoody]

Hello,

 

I am looking for a postprocessor for a 3 axis CNC machining center, the Milltronics VM17 with an centurion 6 controller. Anyone have something that might work for me. If not I guess I will have to write my own.

[Roger Peterson]

Yes, it supports the drill cycles and rigid hard tap. Have your reseller contact me and I will send it over to him.

 

 

You may want to read the faq...

[Rekd™]

Welcome to the forum. Now please go read the FAQ.

 

I have one, but won't 'give' it to you. If you have a specific question about YOUR post, I'll answer it. Otherwise you're SOL

 

'Rekd teh Bonk. Bonk on the head!

[mold100]

Can I have a copy of everyones posts and while your at give me tour configs and a list of customers, can you program somestuff for me too, and oh yea Im hungry cook me some dinner.I will show up for the first time ignore the rules because I must be an exeption I am the ONLY person to BUY mastercam and not get a post to at least start with so give me one.

 

OH and welcome to the forum

[Guest CNC Apps Guy 1]

Welcome bawoody;

 

Now go read the FAQ. It's bad manners to ask for something right out of the gate without contributing one iota of your expertise.

 

OUT!

[MACHINEMASTERG]

and big bear puts the choke hold on bawoody you guessed right if you cant get it from your reseller you will have to write your own !!!

 

[ 06-10-2003, 02:33 PM: Message edited by: MACHINEMASTERG ]

[Allan]

Rekd, do you still have that Milltronics machine? I know how much you like it .

 

Allan

[Rekd™]

I was hoping nobody would remember that.

 

Yeah, I keep all my old stuff.

 

'Rekd teh I love that machine! NOT!

[kyle]

I have looked at purchasing a milltronic, what

did you not like about the machines?

[BernieT]

quote:

---

I was hoping nobody would remember that.

---

Rekd had quite a discussion about Miltronics several years ago, Worth reading if you even THINK about owning a Miltronics. I managed to contribute a few negative comments myself. I'll see if I can find it and post the location.

 

edit: - Previous thread seems to be gone, probably for good legal reasons.

 

[ 06-10-2003, 09:24 PM: Message edited by: BerTau ]

[Jimmy Wakeford from Barefoot CNC]

bawoody,

 

well, welcome to the forum. just wipe your shoe off and come on in. (Alot of guys step in the same pile first time in.) These guys are testy about posts. Send my an email and I will hook you up with a milltronics post.

 

Jimmy

[Guest]

There is a cent5 post on the install disk that would probably work.

[Rekd™]

quote:

---

edit: - Previous thread seems to be gone, probably for good legal reasons.

---

I save the weirdest things some times. :cheesygrin:

 

'Rekd teh pack-rat