FBM very slow to detect and create operations

[Scott Lundin Shopware Inc.]

Which AVs are you guys using that are not interfering with Mastercam functions?

 

F.Y.I.- I have just proven that Microsoft Security Essentials is now interfering with FBM detection and creation of machining operations. I created a simple rectangular pocket that normally takes only 10 seconds for detection and another 10 seconds to create toolpath. Now with MSE running it takes over 4 minutes to detect features and another 4 minutes to create tool path. If I turn off MSE it only takes 10 seconds as mentioned above. I have run this test in different ways but always get the delay when MSE is running. This is with X5/MU3 on Windows 7 Pro-64bit OS on a Dell laptop. Also as I stated in an earlier thread MSE is also causing Cimco to open very slowly on the first occurrence.

 

I also just notice that when it deleays I see on the mcam status bar that it is hung-up while searching the fbm tool table file.

[Scott Lundin Shopware Inc.]

104 views and no one wants to share what Anti Virus software they are using?

[jeff]

I use AVG Free version, used it for years, and it's pretty good.

[Nils N]

Just saw this post, I'm using System Mechanic Professional, haven't had any problems with it. In the past I've also used AVG free version, like Jeff, and no problem

[Scott Lundin Shopware Inc.]

Thanks Jeff, keep em coming.

[Guest CNC Apps Guy 1]

ESET NOD 32 here...

[peon]

Many of us don't use fbm and we prolly don't have X5MU3. We use Sonicwall/McAfee without any issues.

[Chris In-House Solutions]

We use Kaspersky and it seems to work good. I know we have some exceptions added into it to allow it to work.