View Fit Revised

[Thee Rickster ™]

Takashi, our man from Japan fixed a minor issue in the view fit.

 

the tool plane would change to the corresponding view you picked

 

Now if you are in WCS top and T/Cplane top when you use the view fit buttons or

hot key you assign to it, the tool plane will stay in top plane when you change views, now.

 

I assign the 4 view to crtl1 ctrl2 ctrl3 ctrl4, i never use any other method like the default 'alt 1-8'

 

Here is a new link to the revised dload.

 

http://ai-sols.sytes...dev/ViewFit.zip

 

 

Thank You Takashi for this very handy view fit c-hook once again!

 

Regards

Rick

[Jroc85]

[Thee Rickster ™]

Fixed it over night! .....for free....

[Thee Rickster ™]

There was a WCS issue where if you were using WCS Bottom say

and alt1-8 through the views, then used view fit, it would filp back to the top

view.

 

It is completely fixed now.

 

This is a c-hook that had to be converted to x64 bit so the issue may have only been

on x64 bit.

 

his efforts to help us out are free and on his own time.

 

Big thanks to Takashi once again for his c-hook

 

Cheers

Rick

[cobra95kev]

Does anyone know if this works on X7?

 

Thanks,

Kevin C.

[Thad]

Thanks Takashi!

 

Oh, and Rickstrap too.

 

Thad

[cobra95kev]

Thad,

Did you confirm this works with X7 then?

 

Thanks,

Kevin C.

[SledGeek]

dang it.......corporate policy has it blocked

[rocheey1]

yes, it does

[Thad]

Thad,

Did you confirm this works with X7 then?

 

Thanks,

Kevin C.

 

No Kevin, I just wanted to get my thank you in. Still running X6 here.

 

Thad