Please I need help, machining

[VICTORG]

Please I need help in planning this part, if someone can give me suggestions or perhaps you could program it for me and tell me how much I charge for machining ready to send it to me they are grateful, I am willing to pay for this service.

 

http://www.youtube.com/watch?v=MvVMaE0ry1k

[mayday]

Pretty simple job for an Integrex

[VICTORG]

Thank you for your comments, unfortunately, this is beyond my ability pierta knowledge in Mastercam.

So I'm asking for help, if someone could set me what I would pay for it.

 

The holes are not right angles to one indexer.

[GoetzInd]

I don't understand. Do you want this part machined for you, or just programmed? What machine are you planning on running it on?

 

Mike

[VICTORG]

I don't understand. Do you want this part machined for you, or just programmed? What machine are you planning on running it on?

 

Mike

 

I need to make 100 parts of this kind, but I need program to make them. I do not do it, so ask someone to the program for me. I am willing to pay for someone to schedule. the material is stainless steel 316

 

Thank you.

[mig]

Hi Victor

You have to give more information about.

1 What machine you going to use

2 What end mill brand and tybe you have.

3 Stock

4 tolerances and size of part (look like part small )

I would def. start from center hole then i would make some jig and finish part from outside .

[VICTORG]

Hi Victor

You have to give more information about.

1 What machine you going to use

2 What end mill brand and tybe you have.

3 Stock

4 tolerances and size of part (look like part small )

I would def. start from center hole then i would make some jig and finish part from outside .

 

 

I have this machine:

Milling machine kitamura H300 with 4th axis.

3 vertical milling machine 3th axis (1 fadal 4020, 1 cincinati, 1 kuraki) fanuc control.

1 cnc lathe with tail stock

2 cnc lathe without tail stock.

 

 

The file is in IGS, SLDDRW & SLDASM.

 

The long of the part is 1.606"

Please, $ price for programing.

 

[crazy^millman]

Send me your contact information:

 

[email protected]

 

I will be glad to quote you the programming work.