installing X6

[stevenprofke]

Hi Guys,

I have recently upgraded to from x5 to x6 all was ok but my pc was way to slow, so my company unpgraded me to a pc built to the mastercam specs.

In reinstalling software i have x5 working perfectly but have problems with x6.

When starting up X6 i get to where is says checking hasp and everything stops, the program just turns off.

I've tried uninstalling/reinstalling, renamed config(as suggested by mastercam), i dont know what else to do, due to not being very good with computers and being is oz it makes comunication with mastercam(time zone) difficult.

please can anyone help.

[gcode]

go here

http://sentinelcusto...SP4&o=all&t=all

 

set the drop downs to search for HASP4

Download and install

SentinelHASP/LDK RunTime Setup

 

Note that when you click on the link a text page will pop up

You need to scroll to the bottom and accept the agreement

[stevenprofke]

Just tried that and still no good, but thanks anyway.

[gcode]

did you reboot after the driver install

[stevenprofke]

yep, still nothing

[gcode]

did you let it do a default install or did you try to force the install elsewhere

see this thread

http://www.emastercam.com/board/index.php?showtopic=69274&hl=hasp&st=20

[stevenprofke]

I did the default install, all that sounds excactly like what is wrong with mine, i have updated all the drivers, the net framework but still no good, i dont know what files they talk about being wrong to fix and reinstal as the other guy

has had working for him.

[Todd Tracey from Fastech]

Are you installing from DVD or download?

[stevenprofke]

I have tried from the DVD and also from the download.

[gcode]

I was looking for a thread from someone who had a similar problem, but can't find it.

I think he solved the problem by uninstalling X6, then uninstalling all the .NET Framework stuff

and reinstalling from the DVD.

The problem was one of the .NET Framework programs was corrupted

[gcode]

here it is

http://www.emastercam.com/board/index.php?showtopic=67795&hl=+.net%20+framework#entry775265

[Jayson Kramer]

Gcode, this what he stated.

All the directories were wrong, more or less. Reinstalled a bunch of stuff from what I observed.

[stevenprofke]

I have tried everything from both threads and still nothing, after my last uninstall, i have noticed that the "my mcam6" folder is not there, i reinstalled from the dvd so i thought all the folders would be there.

and yes X5 is still working perfectly.

[CJep]

i have noticed that the "my mcam6" folder is not there,

 

The "My McamX6" folder gets created on the initial start-up based on the user logged into the computer

[stevenprofke]

Finally after 2 weeks my reseller got back to me, i uninstalled x6 then he had me run "Cleanup_uninstall_x6 batch file" that mastercam supplied, this deleted every thing that was there and not removed from the standard uninstall,

reinstalled then bang... all good to go, thakyou every one for your help.

Steve

[gcode]

Glad you got it going