How to mirror my toolpaths

[MSL]

Hi all,

 

I made some parts that was required more the 20 wcs and about 250 operations for each part. Now I need to make the mirror of the same parts and I don’t want to program the parts again. Is there any way that I can mirror my tool paths and wcs?

 

Thanks.

[mkd]

um, transform, mirror?

[Rotary Ninja]

Good luck with that

[Jayson Kramer]

You can mirror about planes for some these views. I would really need to see more as you say 20 diffrent WCS's are there 20 diffrent setups or are these used as planes?

[Josh Kinney -Elite Engineering]

Gonna need vericut for that. You won't know if you code is good until it's too late....

[MSL]

You can mirror about planes for some these views. I would really need to see more as you say 20 diffrent WCS's are there 20 diffrent setups or are these used as planes?

 

Hi Jay,

I have 20 different WCS's. I'm using our trunnion table to cut this.

Thanks,

Ara.

[mikechvz]

Gonna need vericut for that. You won't know if you code is good until it's too late....

 

where can i get some info on this?

[mkd]

where can i get some info on this?

http://cgtech.com/

[Jayson Kramer]

Ara, you need me to come by the office and help you? I pass b y you guys every monday and wed going to my customers.

[MSL]

Ara, you need me to come by the office and help you? I pass b y you guys every monday and wed going to my customers.

 

Hi jay,

Sorry for the late response. I got the flu last week and someone else took over the job.

Thank you for your help.

Ara.