HOW TO PROGRAM FROM MASTERCAM X6 TO MAZATROL PROGRAMMING A MACHINE Mazak Integrex 200-IV

[robel]

I GET A COMPANY OWN Mazak Integrex 200-IV MACHINE. IS THERE POST PROCESSOR FOR Mazak Integrex 200-IV TO CHANGE TO MAZATROL PROGRAMMING FROM MASTERCAM. HOW DID I GET IT. IS THERE SOMEBODY HAS ONE PLEASE OFFER ME.

[RayD]

Mastercam can only post in EIA(G-code) your Integrex can run eia files... Contact your reseller for a post

[MarioL]

contact the www.cimquest-inc.com the have a post processor for mazatrol M2. some body make the post processor in Germay for mazatrol cost $$$$$$$$

[scooke4073]

Daniel Harris @ Cimquest is the guy to talk to....he has some pretty slick stuff he has been working on for a few years.

[Guest]

Please refrain from typing in ALL CAPS, ESPECIALLY in the title of a topic. It's tantamount to yelling.

 

That being said, take a look at Camaix.

http://blog.mastercam.com/2013/04/a-mastercam-to-mazatrol-programming.html

 

HTH

[Todd Tracey from Fastech]

There are 2 or 3 suppliers that have posts that will output in Mazatrol. They are ALL chargeable posts as you have to have permission (be licensed) from Mazak to use their code.

[FROZEN]

what is the cost of Mazatrol post and do you need a special seat just for mazatrol or will a mill/turn work?

[gcode]

what is the cost of Mazatrol post and do you need a special seat just for mazatrol or will a mill/turn work?

 

Please read the Forum Guidelines regard pricing

http://www.emasterca...rum-guidelines/

 

Your dealer is the place to go for such questions... or a 3rd part vendor like ICAM

InHouse, the providers of this forum do very nice posts, but you have to go through your dealer

to get a quote