Mastercam X7 Webinar 2 - Mastercam Simulator (Verify/Backplot) - Monday, May 10th @ 2 PM EST

[Aaron Eberhard]

Want to get an in-depth look at the new Mastercam Simulator? Then join us on Monday, May 13th at 11:00 am for open webinar including Q&A.

 

This sessions is a brief technical overview of the new Mastercam Simulator that ships with Mastercam X7. This webinar will cover all of the basic functionality of the Simulator and the integration of it into Mastercam X7. Expect 20-30 minutes including Q&A session.

 

Register here: https://www1.gotomeeting.com/register/181692521

[Newbeeee™]

Aaron,

Please can you record this and save for us to access at our leisure afterwards.

It will be very much appreciated.

Thanks

[Aaron Eberhard]

Again, I can I probably should have mentioned that I was planning on that in my original post...

[Rotary Ninja]

I signed up. Come on newbeeee. My step-daughter loves hearing you British guys say "Al You Mini Um" LOL

[Newbeeee™]

yeh yeh yeh - it's us brits that talk proper like. Unlike you yankee boys

I mean what's wiv all this alooominum, and you lot can't spell colour or gauge or grey or tyre. I mean c'mon, it's ENGLISH you should all be talking

 

Anyway, I'm busy.

[Rotary Ninja]

I'm slowly learning proper English. My favorite show is the UK Top Gear. Still not sure what a "coopay" is. But I think I saw one parked by a "saloon" over here

 

Aaron, will we need mics? Or is this text only?

[Aaron Eberhard]

I love Top Gear.

 

For simplicity, I'll probably ask to keep it text only unless you have an involved problem, then I might give you the mic, but normally it moves quicker if people type their questions, then everyone can see it live, and I can choose what to address on the air. The GotoMeeting packages the Q&A as a text transcript along with the video, so they'll be attached when it's finished up. So you should be fine with just a keyboard.

[Rotary Ninja]

Ok good. Stay working then newbeeee

[Aaron Eberhard]

Well, I'd be sure to un-mute newbeeee if he were in attendance, of course

[Newbeeee™]

Jeremy Clarkson for Prime mInister

[Aaron Eberhard]

Jeremy Clarkson for Prime mInister

 

I can guarantee I know what the burn-out tire marks would look like in front of parliament...

[Todd Tracey from Fastech]

I see we can watch it, how about downloading it? I didn't see that as an option for this one like the tool manager.

[Aaron Eberhard]

Todd - I'll look into it when I can get to a computer, I'm on the road for the rest of the week for Eastec and all of the machine tool vendor open houses, so it may be a bit

[Todd Tracey from Fastech]

All that food and beer to consume at the big shows. Have fun!

[Aaron Eberhard]

Hey guys, I finally got back into the office and got the webinars available for download off of the Mastercam site. From Mastercam.com > Multimedia > Product Demos.

[MrFish]

Hey guys, I finally got back into the office and got the webinars available for download off of the Mastercam site. From Mastercam.com > Multimedia > Product Demos.

 

 

Hi Aaron

 

I am trying to view these from the web site but my WMV tells me I am missing the correct codec, what codec was used for compression ?

 

Thanks

[Brian B 74]

Hi Aaron

 

I am trying to view these from the web site but my WMV tells me I am missing the correct codec, what codec was used for compression ?

 

 

Thanks

 

Look here:

 

https://www4.gotomee...ww.gotomeeting.

[MrFish]

Look here:

 

https://www4.gotomee...ww.gotomeeting.

 

Thanks Brian exactly what I needed ;-)