X7 Verify and picking stock

[Mick]

In X6, I used to start up Verify, and I could go into options and choose Solid, and pick a solid from the screen as my stock. It was quick and simple.

 

Is this an option in X7, or do I have to choose the solid as my stock within the Job Setup in the operations manager? I can't seem to find the quick and simple option in the "new" X7 verify...

 

Can someone clarify this?

[MrFish]

In X6, I used to start up Verify, and I could go into options and choose Solid, and pick a solid from the screen as my stock. It was quick and simple.

 

Is this an option in X7, or do I have to choose the solid as my stock within the Job Setup in the operations manager? I can't seem to find the quick and simple option in the "new" X7 verify...

 

Can someone clarify this?

 

Hi Mike

 

From what I can tell you are correct that it needs to be setup in the job setup parameters before you open verify. I can see this being a pain the the a** when verifying molds and trying to work with the latest stl you have just saved out from your last verify session.

Although the improved speed of the verify will probably offset the extra time required for the additional setup.

[Mick]

Hi Mike

 

From what I can tell you are correct that it needs to be setup in the job setup parameters before you open verify. I can see this being a pain the the a** when verifying molds and trying to work with the latest stl you have just saved out from your last verify session.

Although the improved speed of the verify will probably offset the extra time required for the additional setup.

 

Ugh... Another handy little feature disappears..

[gms1]

Mick those options are still there. Right next to the verify button at the top of the operations manager is a backplot/verify options button. Click that to setup your stocks.

[Colin Gilchrist]

Hi Guys,

 

The option is there, the place you pick it has just changed. GMS is correct, pick the new icon in the Operations Manager to change these settings.

[Mick]

Thanks for pointing that gms and Colin

 

Good to see it is still hanging around

[DavidB]

Nice if you have your verify open on your second monitor and change the stock in MC ops manager it updates the stock on in verify