X7 MU1 verify: cuts disappear on rotation

[crazy^millman]

Ken thank you for posting up that response.

[Müřlıń®]

We are currently looking at both short and long term solutions. Of course the long term solution is to rotate and cut at the same time seemlessly, but we may be able do something short term. If it pans out we will inform you through the beta program.

 

 

I don't see anything wrong with clearing the buffer when rotating if you could make accurate zoom work automatically when you zoomed in and out.

 

Once I start rotating my stock I loose a certain amount of detail when it comes back.

[ktechdan]

I don't see anything wrong with clearing the buffer when rotating if you could make accurate zoom work automatically when you zoomed in and out.

 

Once I start rotating my stock I loose a certain amount of detail when it comes back.

 

Are you talking about the Simulator? The UVBS doesn't do that, unless I'm mistaken.

[Müřlıń®]

Are you talking about the Simulator? The UVBS doesn't do that, unless I'm mistaken.

 

I was talking about when you rotated your model in verify The cut disappears and comes back.

When my cut surfs come back visible, I loose detail somewhat.

So I am assuming there is some buffer dump.

Maybe it is this system....I been having some weird issues with this machine.

[Watcher]

How did we settle on 5ms, anyways? Standard 60hz monitors take 16.7ms between screen refreshes. Even a 120hz monitor would take longer than 5ms...

 

Very well put. Funny how we miss these details... Tks for sharing it...

[Watcher]

My 2 cents,

 

Jon Banquer is a parasite, and as such I don't think one should refrain to make any negative comments about MC just because of him. Because if people only says good things, he will call them fanbois. So there's no win with that dude...

 

IMHO the solution is to act normally... he's watching anyway...