X8 verify

[mig]

Verify stop working.

when lunching geting massege : please look on attachment picture

Anybody has this problem ?

Thank you

[mig]

Still not get any response. One more , if it help for the same issue:

 

 

.

For some reason I can't attach file.

There is no attach tab

 

Same issue was raised above by Rubens . But I did not any see solutions.

[FROZEN]

Have you downloaded beta 2?????

[mig]

Have you downloaded beta 2?????

Yeas , from Monday. May 12

[FROZEN]

try it downloading again ??? Not sure, but my verify seems to be working.

[Jim Evans from CNC Software]

Mig,

 

Please see this posting on the problem and how to resolve the issue.

 

http://forum.mastercam.com/FindPost1168.aspx

[mig]

Hello Jim,

I went thru all kind of adventures to get in the forum.

And I have more questions to ask .

1 . Is person can login to the forum without dongle ? ( From home for example ).

2. You ask reinstall the program ,but nothing say what cause the problem .So it could happened again.

[Thee Rickster ™]

Hello Jim,

I went thru all kind of adventures to get in the forum.

And I have more questions to ask .

1 . Is person can login to the forum without dongle ? ( From home for example ).

2. You ask reinstall the program ,but nothing say what cause the problem .So it could happened again.

 

I can.

 

I assume once you are in it dosent matter if the dongle is in the pc or not

I can also get in from my ipone

[Jim Evans from CNC Software]

Hello Jim,

I went thru all kind of adventures to get in the forum.

And I have more questions to ask .

1 . Is person can login to the forum without dongle ? ( From home for example ).

2. You ask reinstall the program ,but nothing say what cause the problem .So it could happened again.

 

Mig,

 

Once you have linked your account you can log in from anywhere. You do NOT need to login in from the computer that you linked your account with,

 

In the link above I do explain what the issue is and how to fix it and avoid it. The problem simply comes down to an empty key mapping assignment for plane manipulation (no key assignment to switch views). This will be addressed for release so this is only an issue for beta.

[mig]

Thank you Jim ,

I will try .

[mig]

it work . thank you

[Jim Evans from CNC Software]

Glad to hear that worked Mig. Look forward to hearing your thoughts on X8.