Best DNC software?

[Acro Engineering]

Just ported the CAM station over to a new Xeon processor with major speed and more to spare as it is a dual processor machine. Tried to get Spectrum (Multi-Dnc) to give us the license code as we were just moving over computers and they want $500.00 a year for this service even though they haven't updated the software with anything useful since 2006. I am looking for another solution for our DNC needs and asking for opinions here? I understand maintenance agreements and the need for them, to pay maintenance for something that never improves is called rent not purchasing...

[Guest]

Cimco and be done

[Incogneeto]

I Love Cimco so damn easy even I could figure it out . I had to start from scratch new nothing about it at all even had to make the wire connectors myself.

 

Just ported the CAM station over to a new Xeon processor with major speed and more to spare as it is a dual processor machine. Tried to get Spectrum (Multi-Dnc) to give us the license code as we were just moving over computers and they want $500.00 a year for this service even though they haven't updated the software with anything useful since 2006. I am looking for another solution for our DNC needs and asking for opinions here? I understand maintenance agreements and the need for them, to pay maintenance for something that never improves is called rent not purchasing...

[JAMMAN]

Cimco here too. A real old version.

[Oscar R.]

Cimco, quick and painless.

[EX-wccprogrammer]

It really depends on the frequency of transfer.  I like the DNC systems that allow remote request (We use Multi-DNC and used to use Predator) because I have better things to do than send programs.

[Mick]

We have Cimco DNC Max. Barcode system for remote requests.

 

Works great.

[jeff]

Cimco. Period.

[robk]

Cimco DNC-Max with no issues here.

[Joe788]

Cimco DNC-Max with no issues here.

 

Rob, do you guys use Cimco DNC-Max on your Matrix controlled machines with ethernet?

[chris m]

DNCMax for [10] years; bulletproof and simple

[robk]

Rob, do you guys use Cimco DNC-Max on your Matrix controlled machines with ethernet?

No we don't Joe. Those machines are on the network.

[Jayson Kramer]

Cimco would be the best choce and you can use remote call if you want to.there are allot of options if you go to IMTS come see us at booth E-3100 and we will show you. just a few booths from Mastercam.

[Mick]

Will you be at the Mastercam booth, HSM Booth or Cimco booth Jay? Or all three? LOL

 

You were going to get back to me with a name too... Send me a message or email

[Jayson Kramer]

I will be at the Cimco booth and be dropping in to the MC booth and no longer With HSM.