Windows Popping up in Middle of Screen

[Rotary Ninja]

When I select "Analyze Entities" for example, the dialog pops up right in the middle of my screen. I move it out of the way and select an item to analyze and the dialog moves right back in the middle of my screen. Any idea what is causing this?

 

Thanks.

[Jayson Kramer]

This is not a Mastercam thing but a video driver issues as a lot of the drivers have option to control were popups go.

[guitar]

Jay is correct. Sounds like you might have an ATI/AMD vid card. We had this same problem on a pc with such card. There is a setting in the driver software that will allow the pc to remember where each popup goes. Just can't remember the setting.

[gcode]

NVIDIA Desktop Manager has a setting that forces windows to the center of the screen

maybe it's turned on?

[Guest]

If you're using an ATi card, I found the setting here

 

http://www.emastercam.com/board/topic/79489-level-manager-issues/?p=953856

[Rotary Ninja]

God I missed you guys! Thanks a bunch!

[Jayson Kramer]

Kevin, when are we going to catch up?

[Rotary Ninja]

As soon as possible man. I started a new job at a shop that is still a little new. We are going through some growing pains, but I love it! We get to make this place how we want it and I have some serious leverage into the decision making part of it all. It feels good to be respected again!

 

I am in the middle of trying to move, relearn MasterCam, finish my divorce and custody battle, and fill out all this darned paperwork for my insurance and all that crap lol. I will be around a lot more like I was as soon as I get my PC setup in the new place. They are giving me a laptop for now to use at home. So I am in a good place again... FINALLY!

[Jayson Kramer]

Kevin, sounds great. I hope you still have my number so one day give me a ring.

[Rotary Ninja]

I think I do. I tried to catch you again at IMTS before I left, but you were off your leash lol. So I went and hung out with Randy Maynard a bit over at the Mastercam booth