TOOL PATH DISPLAY

[david b]

I have two scollap toolpaths cutting the same job in the same erea.I have changed only a few things in the two prog's,like filter one way and bias angle.What i would like to do now is back plot them together so they lay on top of each other but in different colours.I have the colour display set so my arcs are different colours than my linear moves but can i get a different colur for each programe?????

 

Thx in advance

 

[Hardmill]

Check your display properties in backplot.

I believe its color loop (or something like that).

 

PEACE

[Elmer Fudd]

In backplot check "save as geometry" and it will save the path as geometry using the active color. Save it on a fresh level also so it stays seperate from other entities. Dan

[Sailing4life]

I am using two tools the same dia for verify only and check change tool color at tool change

[Fig sign]

I would save them to the different levels

Backplot ->display ->general->save as geometry->now->save to a level

I would save this operations to a different levels with different colors and you can do anything you like with them !