stl2surf.dll, FTP down?

[Rekd™]

Can someone post a link? I can't get to the FTP for some reason.

 

TYIA

 

'Rekd

[Toolfab]

HTH

 

[Rekd™]

Still not working Paul. Not sure if the FTP is down or what.

 

'Rekd

[Toolfab]

I can get to Rekd. By using the link you need the password. Give Jay a call. I can get to it, so I dont know, did you change your security settings?

 

I dont have the PW, so you will have to get that from Jay...hey sweet 666 posts... the number of the beast

 

(i need some coffee)

 

[ 11-19-2003, 02:35 PM: Message edited by: Toolfab ]

[Fig sign]

Rekd !

 

Check your e-mail

 

ITHH

[JAMMAN]

I was there a couple minutes ago, it worked fine then.

 

I just tried it, still works for me with this link:

ftp://mastercam:[email protected]/Mastercam_forum/

[Scott Bond]

Hi Rekd'

Could it be because Jay read your comment about Michael Jackson ?

 

Toolfab; You little devel-- 666

 

[ 11-19-2003, 02:53 PM: Message edited by: Scott Bond ]

[cadcam]

Reked , whats up. I just checked it's up.

When was the last time you were there?

 

Jay

 

quote:

---

Could it be because Jay read your comment about Michael Jackson ?

---

Ok what did I miss?

[Toolfab]

I was wondering that too Jay. Rekd were did you post about M.J.?

[mayday]

quote:

---

I can't get to the FTP for some reason.

 

---

me neither

[Rekd™]

See the Member to Member thread for MJackson.

 

Iskandar, did you send it to my hotmail account?

 

Jay, I haven't been there in prolly a month, did I miss a change?

 

TY!

 

'Rekd

[cadcam]

Paul < can you try it now and see if you can get to it?

[Rekd™]

BTW, I'm using the link above for FTP.

 

'Rekd

[Fig sign]

quote:

---

Iskandar, did you send it to my hotmail account?

 

---

Yes ,sir !

 

Now listenin` Rainbow No Release (Difficult to cure 1981 ©)

[Rekd™]

quote:

---

Yes ,sir !

---

 

'Rekd teh pouting

 

[ 11-19-2003, 03:17 PM: Message edited by: Rekd ]

[Toolfab]

I can get in Jay, thanks!

 

 

Rekd, nice pull on the MJ qoute....lmao

 

 

[MACHINEMASTERG]

works here... the link at the top of the page

[Rekd™]

Ack!

 

I tried with IE instead of Mozilla and got right in, thanks guys!

 

'Rekd teh anal cranium inversion

[mayday]

been using WS_FTP. hasnt worked latley flaky stuff. IE wont go to an FTP site. me thinks its a network lockout or something

[cadcam]

Oh I could told that would not work alwas right..

IE is waht it is built on.

 

My web site is set for both...

 

glad you were able to get in.

 

Reked feel free to call me any time..

Later jay

[Rekd™]

Got your email, Iskandar, please check for a reply. Thank you, my friend.

 

Matt

[LNDCAD]

I have also not been able to get into the cadcam FTP site the last few days. I always use the link at the top of this page. I am using IE6 SP1 and have not had problems until the last few days. I keep getting "Cannot find server error" after a few minuts of trying to connect. I have not changed any software or hardware in the past week, and am not on a network.

[cadcam]

I will check some stuff out when I can get to the server tonight..

I changed routers on Sunday.

So may be some thing on my side for some of you.

 

I will let you know when I have gone thru it.

[LNDCAD]

Thanks, Jay. I will check back later. I will be out on jobs the next few days. If I still have any problems I will let you know.

[cadcam]

Hi all has there been any one else in the last few days that can not get on any more.

Please let know?

 

thanks for you time jay (Your Local MC FTP webmaster)