Arc centre points in 2017 PC

[Thee Cutterman]

Trying to turn off the auto arc center point.

 

I'm sure that the setting for displaying arc center points was in the config/ cad settings.

 

Driving me mad but cant find the setting in the configuration page anymore.

 

 

 

 

EDIT...  All Good     Im going blind..   Home tab /  Display  /  Arc Centre Points. 

 

 

 

[gcode]

Trying to turn off the auto arc center point.

 

I'm sure that the setting for displaying arc center points was in the config/ cad settings.

 

Driving me mad but cant find the setting in the configuration page anymore.

 

 

 

 

EDIT...  All Good     Im going blind..   Home tab /  Display  /  Arc Centre Points. 

 

 

 

 

 

I was just getting ready to answer your post

I like this setting being available without having to go in and out of system config

[Thee Cutterman]

Yea i like it also now Ive found it.

[gcode]

I normally run with it on, but it's nice to be able to turn it off if things get cluttered.

I'm using it to get cleaner results when printing too.

When I had to go through system config, I usually didn't bother, now it's quick and simple

A nice little enhancement IMO.

Of course a lot of guys turn arc center's off and never think about them again

[Mick]

I normally run with it on, but it's nice to be able to turn it off if things get cluttered.

I'm using it to get cleaner results when printing too.

When I had to go through system config, I usually didn't bother, now it's quick and simple

A nice little enhancement IMO.

Of course a lot of guys turn arc center's off and never think about them again

 

I always switched them off. They made my screen look dirty.... LOL

[Thad]

I like them on. I mostly use them for a quick visual on whether an entity is an arc or a spline. My parts aren't complicated enough for them to get in the way.

[Mick]

So... How can it be set to have them off by default? Just by saving the Config?

[gcode]

The button on the home tab is a switch

It stays where it's set till you change it

[Mick]

The button on the home tab is a switch

It stays where it's set till you change it

 

Sweet Thanks