osp-u100

[jaanvar]

Hi all, I am new to CNC, and learning to operate Okuma CNC Lathe LFS12-2SP (2 chucks and 2 turrets with 2 Loaders). Once my trainer start machine I saw on the screen OSP-U100. I think this is its operating system. Can I get more information about this machine how to operate, how to use panel buttons etc. I searched on Google but could not find any information.

Thanks

[chris m]

There should be an operation manual for the control with the machine. Newer Okumas also come with ALL manuals on CD-ROM. I have an OSP-U100L control on my Okuma LT-15M and it ain't something you're going to learn how to run without the book

 

Sorry

 

C

[Gail Plush / Amcast Automotive]

I have several lathes with this control. Maybe you could tell us what you are trying to do, and we could help you.

[jaanvar]

Well I am working in an automobile company and now they want me to run cnc-lathe coz I have some previous experience. A guy is giving me training how to setup machine, tool offsets and he is doing good. But I want to study at home also. That's why I am looking more information about it.

Thanks.

[crazy^millman]

Good for you and you will go far with that type of attituide. Good luck and think you will have it under you belt soon.

[Hardmill]

+1 Millman

Good luck jaanvar

 

 

PEACE

[chris m]

Good attitude to have

 

The most important thing to remember on an Okuma lathe control is that you have NO CONTROL of rapid moves unless you are in Single Block unless the machine has a seperate rapid override knob but most of them do not. This means that even though you have the feedrate override on '0' the machine will still rapid at full speed

 

If you forget every other thing about the control, remember that

 

If you tell your supervisor what you are trying to do, maybe they'll loan you the operator's manual or the CD-ROM; I would if I were them

 

C