bpa123
-
Posts
26 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by bpa123
-
with maintenance you get upgrades and tech help,without it the reseller does not have to help you(most of them do help anyway)but if you are on maintenace you will be priority and someone without will have to wait.
-
does anyone know the op code for a circle mill in a post? thanks in advance for your help.
-
Change recognition: new solid in wrong position
bpa123 replied to crash2cam's topic in Industrial Forum
their is also a translate function in change rec. its one of the buttons beside regen, and repick geo. -
open the folder you want then right click in the side window and add folder,rename it and when you do a save as click on that folder and it will go their.
-
thanks for the help
-
i need to convert over alot of old v8 file to mx2mr2.it gives me an error corrupt or invalid files.it coverts in v9 but i have to do one file at a time.is thier a way to do it in x2?
-
in toolpaths/circle mill/start holes.this will drill a hole where i sees your contor trying to start.hope this helps.
-
thanks for the help that did it.
-
can i merge a mcx file into another mcx file and bring the tool paths with it? i can get the part in but not the toolpaths.
-
when i try to do a high speed toolpath on a vista machine it says no machinable zone.has anyone else had this prob?i loaded mr2 on this and a xp laptop the xp works fine but the vista dosent.
-
i use vista and got the same thing until i went to configscreendisable hardware acceleration,should be checked.hope this helps you
-
if you contact your reseller,they should be able to answer all your questions at once.
-
i have 2 haas mach. i use a drill chuck and ridgid tapping.ok so far.
-
good morning class
-
welcome to the greatest show on earth
-
welcome ro,seen we were neighbors,what part of va.this is the best place to get info.good luck and have fun
-
are you using a floating tap holder(tapamatic)or are you ridigid tapping with the tap in a solid holder?
-
did you have tip comp on.i have had it give some crazy z depths with that on
-
your reseller can give you a cimco disk(if you dont have one)load it on the computer on the floorand try the 30 days for free and see how you like it.
-
not sure what your looking for?but i picked a number anyway
-
we started with the gen post.works good with a little tweak.
-
the post i use gives everything but the Q.the D is given when you choose control.
-
+1 TO GO NAVY I HAVE A TM1 WHEN YOU FIRE IT UP DO YOUR HOME RETURN,HIT SETTINGS BUTTON,TYPE IN 51,PUSH THE DOWN ARROW,PUSH THE RIGHT ARROW KEY TO ON,THEN HIT THE ENTER BUTTON.WORKS EVERY TIME.YOU CAN ALSO MAKE TOOL CHANGE WITH NO DELAY(NOT AS SAFE BUT CUTS ALOT OF MACHINING TIME)EMAIL ME IF YOU WANT THOSE STEPS.
-
+1 TO KANNON123 I DO THE SAME.JUST COPY THE OPP AND ADD STOCK TO XY TO LEAVE ON THE FIRST OPP.TOLERANCES HIT FOR ME.
-
i go to the class on 1-25-05.hope to win mc design that they are going to raffle off.im excited to see x