john_070
-
Posts
37 -
Joined
-
Last visited
Never
john_070's Achievements
Newbie (1/14)
0
Reputation
-
use a emuge pusher style tap and go max on minor dia. i've tried them spiral taps that pull chips up with no luck on any thing remotely deep.
-
more of an illusion then any thing might try heavier finish cut more chip load.
-
try a bikford point drill
-
Worked for a place had 15 machines and enough tooling for three of them could never find any thing in that shop. or had to share between cycles. how pathetic. Spent more time looking for tools or holders than any thing. I feel for anyone that has to work in that environment. Just my vent sorry.
-
Both arcs have to be one section.
-
Mitsibishi diamond star hog mill. drill hole end of slot. then walk down the center full depth roll wall then run finish tool.
-
Before I got the c hook just do a incremental loop sub how ever many times you need to get your lenght.
-
Bernie. my support/tech guy e-mail a chook today for going straight down the center of a slot.
-
Can anybody give some tips on just getting the tool to go straight down the center of a slot. Called my reseller but he didnt know either. I saw in ftp site(high speed file) trochoidial 2 movie clip thats what i need. Do you need geometry down the center.? Thanks in advance.
-
sometimes i use hss drills.
-
I use 500sfm .008 @.15 depth all day long on a fadal.
-
Looks like the same guy's griping are on the computers alot? (working of course)
-
Sorry about the troll post but just thought it was funny to look at axsys sight to have them bragging about being the number 1 top seller of mastercam. what about there customers who made them the biggest. We have to beg to get service.
-
Axsys says there the biggest reseller on there site. Find that hard to believe, Are we the last to get X
-
300 and three works for me why rush it.