john_070
-
Posts
37 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by john_070
-
use a emuge pusher style tap and go max on minor dia. i've tried them spiral taps that pull chips up with no luck on any thing remotely deep.
-
more of an illusion then any thing might try heavier finish cut more chip load.
-
try a bikford point drill
-
Worked for a place had 15 machines and enough tooling for three of them could never find any thing in that shop. or had to share between cycles. how pathetic. Spent more time looking for tools or holders than any thing. I feel for anyone that has to work in that environment. Just my vent sorry.
-
Both arcs have to be one section.
-
Mitsibishi diamond star hog mill. drill hole end of slot. then walk down the center full depth roll wall then run finish tool.
-
Before I got the c hook just do a incremental loop sub how ever many times you need to get your lenght.
-
Bernie. my support/tech guy e-mail a chook today for going straight down the center of a slot.
-
Can anybody give some tips on just getting the tool to go straight down the center of a slot. Called my reseller but he didnt know either. I saw in ftp site(high speed file) trochoidial 2 movie clip thats what i need. Do you need geometry down the center.? Thanks in advance.
-
sometimes i use hss drills.
-
I use 500sfm .008 @.15 depth all day long on a fadal.
-
Looks like the same guy's griping are on the computers alot? (working of course)
-
Sorry about the troll post but just thought it was funny to look at axsys sight to have them bragging about being the number 1 top seller of mastercam. what about there customers who made them the biggest. We have to beg to get service.
-
Axsys says there the biggest reseller on there site. Find that hard to believe, Are we the last to get X
-
300 and three works for me why rush it.
-
OT; fines floating in coolant and new mori update
john_070 replied to Bob_Looney's topic in Industrial Forum
We use that filter fiber from our grinder. Almost looks like fiberglass matting works great. -
+1000 to what jeff said. jeff have you ever worked at master mfg?
-
Good points tool man. But alot of the time you have to move around to make jumps in the pay scale. plus you get to see new type's of work and different methods of manufacturing. My last job was whatever you hired in at is where you stayed. I was there for 4 years. before it clicked in my head that it was a dead end. Make's me mad because I care about my performance. And the company basically $hit on me.
-
Eastech 1 I can't survive on forty hour check.
-
Thank You for the help.
-
What do you mean "passive" fire wall ?? Router? PLease explain i'm computer stupid.
-
Where does one go after CNC programing?
john_070 replied to Metal Flake (clocked in)'s topic in Industrial Forum
+1 what he said imagineers with no concept of construction. -
Played around for an hour trying to do this. I am confused about how you select your radio buttons. some times it highlights the nci stuff. other times it didn't seems like you have to do it in a certain sequence, other times it worked but it did not use the right offsets. started out good but just failed to go E1-E2- then it would just position without an E code. tried to get to the ftp site? have a great day
-
How do you do two of the same part with multiple fixture offsets. I use a fadal and have always just sent out the program and manually turned it into subs. Is there a easier way. In MC. Thank You in advance.
-
Thanks that's great learn stuff every day here.