Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Jeff2005

Verified Members
 View Profile  See their activity

  • Posts

    462

  • Joined

  • Last visited

 Content Type 

Everything posted by Jeff2005

  1. Jeff2005
    Would someone send me the X+ setup sheet for X2 or tell me where I can download it from please. thank you, Jeff
  2. Jeff2005
    Ok I understand that. It will go through all the steps when I am trying to post a setup sheet, but when it gets to the end it does nothing.
  3. Jeff2005
    I don't see the read me file. It should be with the html.set, right?
  4. Jeff2005
    Can anyone help? I loaded the MR2 and side by side and when I tried to go back to MR1 the HTML setup sheet doesn't work now. It goes all the way through the questions it asked then it does nothing. Can anyone help? Thanks, Jeff
  5. Jeff2005
    Correct me if I'm wrong, version 9.1 was able to select the one surface that was going in a differnt direction than and just change that one non cooperating surface?
  6. Jeff2005
    I am trying to use the finish flowline toolpath but for some reason on each surface the tool path starts in a differnt direction is there anyway to select just the inividual surface and only change it without changing any of the other surfaces or am I just beating my head against the wall for nothing? thanks for any help you can give me.
  7. Jeff2005
    I do understand that .eia is same thing as .nc. The extension will be, .eia? thanks,
  8. Jeff2005
    We are getting a 3 axis mill.
  9. Jeff2005
    Will the generic MPMASTER post work for the mazatrol control? thanks for your input. Jeff
  10. Jeff2005
    Mine does the scramble of my toolbar when my screensaver comes on and then I move the mouse to get out of the screensaver it scambles mine up.
  11. Jeff2005
    Threads from the mcmaster website are not drawn correctly. It can give just a visual of what you are working on. thanks,
  12. Jeff2005
    JOHN Will you modify that for me or at least give me some direction in the right way? Thanks,
  13. Jeff2005
    Yes it needs to be in the area of a spindle start up.
  14. Jeff2005
    Thanks but we don't have an air gun option on our vf-5. thanks anyway.
  15. Jeff2005
    THRU THE SPINDLE?
  16. Jeff2005
    BTw, where would you put that line at in the post?
  17. Jeff2005
    Well maybe I didn't know how to ask the question. I am slow.
  18. Jeff2005
    Ok the code that I have is not an M code it is a code that is used in the Haas machine but I would like it to be an option in my tool parameters if possible. #1119= 1 turns thru the spindle air on, and #1119= 0 turns it off. I am not sure how to get around the (#) sign.
  19. Jeff2005
    Ok, I agree. How do I incorporate the setting of thru the spindle air option? thanks, Jeff
  20. Jeff2005
    How can I configure my post to support a different coolant option such as air? thanks,
  21. Jeff2005
    Thanks guys I will try it. Yes I do agree it is probably not necessary to show threads, or not worth my time but it was just a question that came up in the shop. Could it be done? I know it could be done, the question was, HOW? thanks again.
  22. Jeff2005
    How would you put threads in a solid? thanks, jeff
  23. Jeff2005
    Now, for some reason it is not putting decimal points in the "R" EX: R5 suppose to be R5. Thank, jeff
  24. Jeff2005
    I am running a standard mpmaster post and I know there is a place in the post to get the program to post out quadrant arcs instead of half or full arcs. Would someone point me in the right direction please? thank, Jeff
  25. Jeff2005
    Sorry about that. 2-3.2GHZ PROCESSORS (XEON) 3 GIGS OF RAM DELL WORKSTATION WITH A NVIDIA QUADRO FX 3400 WINDOWS PROF. I think that is it.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...