Jeff2005
-
Posts
462 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jeff2005
-
Does anyone know how to figure knurling on a Mazak Mazatrol Lathe? This is either with a knurling tool or a thread tool. Thanks Jeff
-
Yes I currently do it this way but I was curious why there are tool libraries that have numbers up to 900+ because now I use tools that go in the same pocket as, say, t30 but I use the setup sheet to clarify any changes. thanks for your input. Jeff
-
The magazine in our Haas machine only has 30 tools. If you have one labeled T176 in your tools how does it know what to pull up?
-
Do you keep the tools numbered like your tool changer or do you number them sequentially? Thanks
-
I have been using Mastercam for a while and we always use the tool numbering to match what the tool changer has, but I have been wondering why in the default tools they have them numbered 1 thru 900 or more? What is the purpose for this or am I missing something with the numbering system? I would think you would still have to number your tool to match the tool changer so it knows to pull up the correct tool. Thanks for any input jeff
-
Mazak Lathe 200-II Nexus using EIA programming?
Jeff2005 replied to Jeff2005's topic in Industrial Forum
Guys this helps alot. Thanks, Jeff -
Is someone using the Mazak Lathe 200-II Nexus? And are you using the EIA program side instead of the Maztrol programming. If you are then can you send me a sample program of what is suppose to be in the program? We want to use the EIA program but don't have a sample program. thanks, JEff
-
Sorry, too many irons in the fire today. Tool change.
-
You are correct Jack, every Tool.
-
Can someone help me with my Post for My Mazak Mill fusion 640/M. I need it to post out M01 after every operation. Can someone help guide me through this change, I would greatly appreciate it. Thanks, Jeff
-
High Feed Cutters and Mastercam?
Jeff2005 replied to Ron Branch @ Verisurf's topic in Industrial Forum
Why can't you use the chamfer cutter and change your angle, that is what I do unless your using a different Highfeed cutter, if that is the case then never mind. thanks, Jeff -
I want to save the verify file to a STL file but I get a fatal error message that shuts down Mastercam X3. Has anyone had this problem? Can someone help Thanks, Jeff
-
I checked this morning and everthing seems to be ok Thanks, JEff
-
Yes you have to change your post so that the coolant comes on first then your spindle. It is easy to change. If I had time I would send you my post to look over, and compare. IF you can wait I can send it to you Monday.
-
quote: I'm sorry this is giving you so much trouble. Thanks from me too and Merry Christmas
-
Now I can't get on the FTP site anymore
-
Yes that worked for me. Thanks, Jeff
-
Alright a new week and everyone is excited about being back at work. So has anyone been able to work on the FTP site? Thanks, Jeff
-
I leave at 3:30 Central time, today and won't be back till Monday.
-
I can't see what kind of error you get, due to our MIS department doesn't allow me to view some data.
-
Has anything changed in the last month that I don't know about with the FTP site Pleas advise Thanks,
-
Is anyone working on this problem or am I the only one having this problem? Thanks,
-
No luck on the FTP site yet?
-
quote: "An error occurred opening that folder on the FTP server. Make sure you have permission to access that folder. The operation timed out." This is the same message I received.
-
I tried again now it is asking for a password. Should I have a password?