Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
1 Can I change background color at operation manager
After install SetupX+_MR2 op manager window have dark blue background color
2 In ver9 I can configure in job setup generate toolpath immediately or not
May I do the same in X_MR2
Something changed with reverse post features in Virtual CNC ver7
I have rev post manual for old version and wondering need make inquiry for new one or not
I start to dig a 5axis machining with Mcam9 and find c-hook Tool5ax
Seems it was created for old version 5 or 6. Interesting to know are that functions now implemented to Mcam9? And what advantages if I will try to use this c-hook.
Some functions looks interesting and not understanding for me now . Anybody have experience with this c-hook? If so could to put files to cadcam's ftp how it work before and after.
This segment of post always help me with helical and circular interpolation
Hope it help to discover from where you got wrong code
*************************************************
pcirout #Output to NC of circular interpolation
if abs(zinc) <> zero & plane = 0, #Doing a Helical move
[
if arcoutput <> zero, arcoutput = zero #Set for I,J,K arc format
kpitch = (360 / ABS(sweep)) * ABS(zinc) #Calc. the helix pitch
]
else, kpitch = zero
if full_arc_flg = 1,
pcan1, pbld, n, `sgfeed, sgplane, sgcode, sgabsinc, pccdia,
pfxout, pfyout, pzout, pcout, parc, [if kpitch > zero, *kpitch],
feed, strcantext, scoolant, e
else, pcan1, pbld, n, `sgfeed, sgplane, sgcode, sgabsinc, pccdia,
pxout, pyout, pzout, pcout, parc, [if kpitch > zero, *kpitch],
feed, strcantext, scoolant, e
*************************************************
quote:
Is Australia that bad ? I just assume better then in developing countries
And I with Australian guys
If have ability and will why not apply for feel "wind of changes"
Yes, I know that "The Magenta toolpath is only a simulation of the control path." but why this warning message appear every time if I will run additional contour operation. I played with Q1520 Y/N for McamX post but same result. Contrary at Mcam9 only show me Magenta toolpath when I use CDC without warning message
gcode
quote:
page 394 of the Reference GuideWhat Reference Guide you referenced. I've looked at
MastercamX Post paremeter reference and my finished at page 326
Anybody note when try to run MPMasterx post with subprogram toolpath output additional file *.aux
I've noted at first with my own post but after repeat the same with MPMasterx I start to think problem come from MP.dll???
I always use CDC at finish 2D toolpath
How to kill this remainder forever?
I would prefer only as in V9
1520. Display a warning when cutter compensation in control simulation finds an error? y
And I see it's tick at control definition but
this note quite annoying
The same problem with Auto logon after install .NETv1.1 It's a little annoing
Perhaps any windows guru will advise how to pass without additional cliks for winXP???
Did anybody have experience to work with spline interpolation with Heidenhain control
I don't understand how to get right code from Mcam9
And when I open manual for Heidenhain ISO did not find any info about spline interpolation for same CNC
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.