I have a I80M that I tested last fall and it worked with gust the G3 and F15. with the arc. move

done up to 390

I only have 13.2 as the high number what patch did mis gitting? V9sp1 [ 11-11-2002, 03:07 PM: Message edited by: MichaelJ ]

Hi all I have looked in to the earlier post that had a link to the modern machine mag. Part on harmonic balance cutting tools to get the max. Cutting speed with no chatter with the right frequency for the tool. Do many shops use this? Thank you

I use a chip brake just to keep the chips from raping around the drill bit.

You can buy collet type tool holders, why do you want R8 collet?

Is that in MC if so wear thank you

I would like to thank James and Jay for there time and help to the forum. I don?t post too much here but find answer I need in the back post that is helpful or a call to the mc rep for a quick reply

good luck for the race i will try to get it on tv if nascar not on.

I get all fo my Custom ground tools from John from Paxton Production Tools in SLC.

I went to work in a shop about 12 yr,s ago and they hired this old man 3 months latter, then they went looking for a cnc mill and he went and said what are you going to do with that thing it dont have handels, so we got it then in two yr, we got the new one then 6yr, we got an eztrack that was ok it had handels then the shop got slow and he went from the book and put in the sampel prog. and fix it later so he could run it in the morning the old boy had wood for a week and he has it on his wall at home so dont count out the old guy. this was gust the short story. he retird at 85 it was ten yr, of learning that i will never forget Just remember you can teach an old dog new tricks it just takes awile and patients and I love my old dog.

Hi what is your feed rate? We have a Bridgeport with ther controler on it and top feed is about 15ipm with no speed change in the corners

Hi try wixtools.com or drillmasters.com and see if that will work