Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
It is the rapid moves the picture shows it following the roughed contour and it verifys fine but stuffs in the machine if I change it to absalute clearance it is fine
It is on a Matsuura fanuc 18i but it has done it once before on our okuma to.
Altek, I have not met you but I did know many people there. Is Jim still working there on the Mazak Cell and is it true you guys are moving to Everett?
A good option to buying a HAAS is try out YCM a little more money but at least twice the machine we bought a 50 taper 10000 rpm it is really an amazing machine for the money.
I opened your file you can pick the top 3 surfaces together then the bottom one in a seperate op click single row may not be perfect with the flat endmill but close
did you try using the single flow check box. they are right if the two surfaces cant align you will not be able to use flowline unless you seperate them
H and D's could be handled easier by using the machines system variable
Spindle tool is generaly a 5000 variable so you could just tool change and have H=5020 D=5020
that way wich ever tool is in the spindle both comps are active for it
I am an Idiot but I still cant figure this out!
first if you use solids for drilling you can not get the change at point to work. So I create points at the desired locations which work for change at point. So when I pick them to drill it does not do it in the order I picked, But you are right it is the order I created. Is there no way around this except to create them in the order you want to drill them?
Is that going through a network printer? the printer on my computer prints fast no matter what but the network printer is slower between wire and shading. Maybe it is printer settings?
Mop tool does 3 things
Air cut reduction
load monitoring
adaptive feed control
You run several no load programs for each axis prior to setting up your cutting data
each tool has multiple setting pages
for pocketing, contouring, diffrent types of cutting applications. Then you can group it in material types also. It will prevent chip thinning, insert life increases and run time increases. I have set it up at customers several times on average tool life has increased 15 to 30 percent, and run time decreased on average 26 percent. They have AE sensors on machines sold in japan Acustic emissions it listens to the cut instead of monitoring the load they took it from there cnc grinder balance technology I beleive. Great option may not be field retrofitable.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.