Webby
-
Posts
1,281 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Files posted by Webby
-
Free
Sample - Mastercam X5 Handbook Volume 2
This is a sample PDF. For more information on this title, visit the store or download the file.
2,984 downloads
0 comments
Updated
-
Mpmaster - Master G-Code Post - Version 8
By Webby in Mpmaster (all versions)
Based on CNC Software's master mill post - Mpfan - this post has additional features.eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mpmaster for V8 - our master configurable 4-Axis G-Code post. This includes Mastercam's Mp Mill Post Processor Executable V8.21.
Updated May 2, 2002
Special Features
File header tool table - configurable for Predator Virtual CNC and MetaCut View tool definition and stock comments Enhanced header entries Single rotary axis prefix setting No output of "A" for 3-Axis programs Sets WCS style in post, not in Misc Values Manual Entry 1005 for G-Codes, 1006 for comments Min/Max Z depth comments Stock left comments Coolant off with last Z move Optional support for Acramatic 2100 style helical moves Lock on first WCS for use for 4-Axis rotary toolpaths
Sample Settings
Use this list of switches at the top of the post to influence the output code, and to enable or disable special features.
# -------------------------------------------------------------------------- # General Output Settings # -------------------------------------------------------------------------- spaces : 1 #No. of spaces to add between fields omitseq : no #Omit sequence no. seqmax : 9999 #Max. sequence no. arcoutput : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180 arctype : 2 #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc. breakarcs : no #Break arcs into quadrants? hel_2100 : no #Acramatic 2100 style helical moves, 0=no, 1=yes usecanned : yes #Use canned drilling cycles? Set to no for long output. wcstype : 2 #0 = G92 at start, 1 = G92 at toolchanges, 2 = G54, 3 = Off force_wcs : yes #Force WCS output at every toolchange? stagetool : 0 #0 = Do not pre-stage tools, 1 = Stage tools tool_table : 1 #Tool table, 0=no, 1=yes, 2=Predator VCNC, 3=Metacut View output_z : yes #Output Z Min and Z Max values (yes or no) cool_zmove : yes #Coolant off with last move maxfeedpm : 500 #Limit for feed in inch/min maxfeedpm_m : 10000 #Limit for feed in mm/min use_gear : 0 #Output gear selection code, 0=no, 1=yes max_speed : 10000 #Maximum spindle speed min_speed : 50 #Minimum spindle speed sextnc NC #NC extension override Typical Vertical 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "A" #Rotary axis prefix vmc : 1 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 1 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z
Typical Horizontal 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "B" #Rotary axis prefix vmc : 0 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 2 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z
478 downloads
0 comments
Updated
-
Free
Sample - Mastercam X4 Mill Level 3 Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
3,140 downloads
0 comments
Updated
-
Free
Sample - Mastercam X4 Design Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,573 downloads
0 comments
Updated
-
From $39.99
Mastercam X4 Handbook Volume 1 (PDF)
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
The Mastercam X4 Handbook Volume 1 teaches the basics of 2D modeling and machining; computer fundamentals, basic and advanced CAD drawing, working with CAD data, basic solid modeling, basic 2D Toolpaths such as Mill Contour, pocket and Drill, along with 2D High Speed Toolpaths, Feature Based Machining, Toolpath modification, Toolpath verification and Post Processing.
0 comments
Updated
-
Free
Sample - Mastercam X4 Art Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,705 downloads
0 comments
Updated
-
Mastercam X5 Transition Guide
By Webby in Tips & Guides
This guide is designed to help Mastercam users re-create their Mastercam work environment – and their current jobs and parts – as quickly as possible after installing a new Mastercam release. It provides the information you need to update your work to Mastercam X5 from any previous Mastercam X version.
2,067 downloads
Submitted
-
Free
Sample - Mastercam X5 Solids Training Tutorial
By Webby in Training Tutorials (Imperial)
This is a sample PDF. For more information on this title, visit the store or download the file below.
3,681 downloads
0 comments
Updated
-
Free
Sample - Mastercam X5 Handbook Volume 1
This is a sample PDF. For more information on this title, visit the store or download the file.
3,314 downloads
0 comments
Updated
-
Sample - Mastercam X3 Mill Level 1 Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,427 downloads
Updated
-
Intro to Multiaxis Training Tutorial Downloads
By Webby in Mastercam X5
These files are intended for those who have purchased the Mastercam X5 Intro to Multiaxis Training Tutorial, available in print form here and eBook form here.
Included files:
Updated 13/12/2010 to include the toolpaths on the file provided for Tutorial 7 as required by the book.
LOGO X5.MCX-5
Tutorial 1:
TUTORIAL 1_CONICALHELIX .MCX-5
Tutorial 2:
TUTORIAL 2 .MCX-5
Tutorial 3:
TUTORIAL 3.MCX-5
Tutorial 4:
TUTORIAL 4.MCX-5
Tutorial 5:
TUTORIAL 5.MCX-5
Tutorial 6:
TUTORIAL 6.MCX-5
Tutorial 7:
TUTORIAL 7.MCX-5
Tutorial 8:
TUTORIAL 8.MCX-5
Tutorial 9:
TUTORIAL 9.MCX-5
Tutorial 10:
TUTORIAL 10.MCX-5
Tutorial 11:
TUTORIAL 11.MCX-5
3,480 downloads
Updated
-
From $39.99
Mastercam X5 Mill Level 3 Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
The Mastercam X5 Mill Level 3 Training Tutorial gets a total refresh with 7 new projects and 7 accompanying practice exercises that span a wide degree of complexity. It is strongly recommended to have a good understanding of 2D machining (provided in the Mill Level 1 Training Tutorial, for example) before beginning this book.
All of the parts are designed with machinability in mind and include suggested fixtures and tool setups. Clearly laid out objectives and dimensioned step previews make it easier than ever to follow along.
Over 950 pages of content cover 3D wireframe and surface geometry creation, Surface Finish and Roughing toolpaths. An emphasis is put on the advanced Surface High Speed Toolpaths, including the new X5 High Speed Toolpaths, STL Stock creation and its use in solid model verification. Machine Simulation is also used to check for collisions between the part, the tool and any of the machine’s components. Finally, the General Notes chapter provides useful tools, shortcuts and 3D toolpath parameter descriptions.
0 comments
Updated
-
Design Training Tutorial Downloads
By Webby in Mastercam X5
These files are intended for those who have purchased the Mastercam X5 Design Training Tutorial, available in print form here and eBook form here.
Included files for the Mastercam X5 Design Training Tutorial:
Tutorial 10:
TUTORIAL_10.MCX-5
Tutorial 16:
TUTORIAL16 WIREFRAME.MCX-5 TUTORIAL16_ EXERCISE WIREFRAME.MCX-5
Tutorial 17:
TUTORIAL17 WIREFRAME.MCX-5 TUTORIAL17_ EXERCISE.MCX-5
2,707 downloads
Updated
-
Mplmaster - Master G-Code Post - Version X4
By Webby in Mplmaster (all versions)
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mplmaster for X4. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Updated June 9, 2009
Special Features
X4 specific parameter updates to maintain previous functionality
X coolant support
X comment support
Compatible with machine def changes for machine configurations
Y-axis
C-axis and required output type
[*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle
thdang = rad2deg$ * thda1$ #half of the thread angle
thdang = rad2deg$ * thda2$ #thread angle (full included angle)
[*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
1,208 downloads
0 comments
Updated
-
Art Training Tutorial Downloads
By Webby in Mastercam X4
These files are intended for those who have purchased the Mastercam X4 Art Training Tutorial, available in print form here and eBook form here.
Included files for the Mastercam X4 Art Training Tutorial:
BEE_GEO.MCX BEE_MOLD.MCX MASTERCAM_ART_LOGO.MCX pirate-head.zip STYLES.MCX sunset.zip
4,514 downloads
Updated
-
Free
Post Info Submission Form - Mill
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
1,720 downloads
Updated
-
Free
Sample - Mastercam X4 Handbook Volume 1
This is a sample PDF. For more information on this title, visit the store or download the file below.
3,568 downloads
0 comments
Updated
-
Mill Training Tutorial Downloads
By Webby in Mastercam X2
These files are intended for those who have purchased the Mastercam X2 Mill Training Tutorial, available in print form here.
Included files for the Mastercam X2 Mill Training Tutorial:
TUTORIAL14EXERCISE.MCX TUTORIAL15_WIREFRAME.MCX TUTORIAL15EXERCISE.MCX
2,714 downloads
Updated
-
Free
Sample - Mastercam X4 Wire Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,328 downloads
0 comments
Updated
-
Free
Mastercam X7 Quick Reference Card
By Webby in Tips & Guides
This quick reference card highlights time-saving keyboard shortcuts and ways to customize Mastercam. A must-have for any Mastercam user!
1,345 downloads
Updated
-
Free
Sample - Mastercam X5 Handbook Volume 3
This is a sample PDF. For more information on this title, visit the store or download the file.
3,388 downloads
0 comments
Updated
-
From $39.99
Mastercam X4 Project Workbook (PDF)
By Webby in Training Tutorials (Imperial)
Ideal for High School students yet practical for hobbyists, the Project workbook provides a great approach to learning Mastercam for those who prefer project-based learning. Eleven projects - some consisting of multiple parts - are provided with step-by-step instructions, helpful hints, basic machining and CAD/CAM overviews.
0 comments
Updated
-
Free
Mastercam X6 Enhancements
By Webby in Tips & Guides
A look at what's coming with X6 as per www.mastercam.com.
1,209 downloads
Updated
-
From $30
Mastercam X5 Wire Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
The Mastercam X5 Wire Training Tutorial provides users with an excellent resource for learning Mastercam Wire. This practical set of tutorials focuses on 2D & 3D geometry, Wirepath creation such as Contour Wirepath (open contour, multiple contours, die and taper angle), 4-Axis Wirepath and No Core Wirepath.
Each tutorial guides users from geometry creation right through to G-Code generation. Additionally, the Wire Tutorial includes 6 mechanical part projects providing step-by-step instruction for Mastercam Wire, with each section containing screen shots and windows/menus for Wire/Power, Cut Parameters, Compensation, Stops, Leads, Taper, and more.
0 comments
Updated
-
From $39.99
Mastercam X4 Beginner Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
This book provides a comprehensive step by step approach to learning Mastercam. It contains pages of projects, helpful hints.The book covers six mill part projects, two lathe projects, three solid projects and an additional 17 exercises. Each tutorial walks you through all the procedures from Geometry Creation to Toolpath instructions, Verification and G?Code Generation.
The material covered includes 2D Geometry and Solids Creation, Drilling, Tapping, Contouring, Pocketing, Circle Milling and Slot Milling. It also contains 2D High Speed Toolpaths. Explanations are given for the use of transforming toolpaths as well as proper Stock Setup and Tool Settings. The Beginner Training Tutorials also include a General Notes chapter with useful tools and shortcuts that make the software easier to use. A description of the 2D toolpath parameters of the Solid menu and Operations Manager are also covered in the General Notes.
0 comments
Updated