Yes, I'm the reseller from Singapore. At first I thought it could be due to the new HP Laptop or firewall in the Norton 360 that I'm using. disable the firewall does not help I tried with others PC, but that doesn't success too.

Hello, I was trying to downloads the Mpmaster post. But for some reason, it always prompt error message : I tried clicking to download others file. It all have similar erorr. I'm using Win 7 64bit, IE9 and FireFox 10.0.1 Thank you regards Chiang

Jim, Thank you for the link. Wonder is there a post that support multi z cut with a L (numbers of cuts). example : M98 P1000 L10 which mean sub call program o1000 10 times. Some user use this to control the depth of cut in the subprogram (instead of having to output the "M98 P1000" 10 time in the nc program)

Hi, I've heard a lot of benefit about MPSUBREP.PST but was unable to locate it in this site. Could someone advise me where is the link for this post? Thank you and have a nice day

Thanks Gunther! It is really a good tools on this setup sheet. I started testing this morning and figure out that that we can actually change the number of decimal and the date format (mm/dd/yy to dd/mmm/yyy or any preference)) at the Windows, Control Panel, Regional setting. Pip, I was trying to paste the screen shot for you to view the setting. But dont know how can I add that in this message.

Hello, Have any of you heard of I-Mold for SolidWorks? Have use or any comment on this product? How is it compare to UG Mold wizard or Pro E ? Thank you [ 02-06-2003, 12:15 AM: Message edited by: Chiang Chin Hock from Techtown ]

Yes, Mastercam can do that. EIA are just G & M code in Mazak machine. Not much different from a Fanuc control.

Hello, We have two customer using this Dyna 2400C machine. I don't think Cimco Edit can link to this machine. The machine have a limited memory. It only can read upto 900 blocks. The machine is linked to a PC with a DOS communication software that will break the program to smaller file if the file is more than 900 block. And from there it will send those files continuely to the machine. I can't remember what is the software name, it came together with the machine. Hope this is helpful to you.

I personally do not like the Auto Updates feature. The latest patches might not be the best. Especialy when we are talking about CAD/CAM system. Mastercam. Thanks guys for your advice

Hello, I belive there are alot of you are using the WinXP Pro for the Mastercam ver 9. Any suggestion on should we set the XP to Auto Updating patch? Thank You

Yes, its a good ideal to test it. But, how do we explain that this Dell laptop work fine ? Well, infact I told the customer to get a Dell laptop for the machine....

Yes, I had tried that before. I had also try to lower the receive and transfer buffer to the extreme low. But, with no help. The strange thing is that. I and the Engineer from Makino had used our Dell Laptop to test the DNC. And both work. It don't seem to work for others PCs even though all the setting are the same. The Makino Engineer had give up trying. Fanuc do not want to test the port with a PC. They only provide testing on thier reader.

Hello, Thank you for the suggestion. Never expect to get a reply after two years of waiting. Will try your suggestion when I had a chance to go to the customer place. Thank you.

Hello ngkim, Are you refering to ver 9? Send me a sampl, I'll take a look on it.

hi, you might need to download the ver 8.1.1 patch.

kwolf, Who is your dealer? you should be able to get help from them.

you may want to purchase the Mazaktrol editor or W_r software from Camaix www.camaix.com

Hi Randy, Where are you from ? There are also some books that you can find in this forum http://www.emastercam.com/resources/

Hello Marc, Which version of the Mastercam are you using? I'm using ver 8.1.1 I've upload the modified file at the FTP site. drill point sort-modified.MC8 Good luck

At the Toolpath, Drill, Options, Click one more time on the sort method that was ativated. This will turn the sorting "OFF".

Hello everyone, Well it really doesn't matter to me whether it is know as reseller or member. We are a member in this forum. I notice there that there are many helpful and experience member here. But, as what I had memtion to Dave. This forum is meant for licensed users only. And I know that there are quite a number of unlicensed user in this forum. If you were to look carefully on their posted question. You will know what I'm trying to say. It will be nice to see all member to include their country of origin ( you should be proud of your own country). This will also help the reseller to take note of what their user are facing. And at the same time to improve their service if necessary.

Dave Thank you for your understanding.

Hello wenfafa, At the Mastercam, Press Alt+ V . It will show you the HASP number (4 or 5 digits number). What is your number?

Hello ngkim, What is the Mastercam version are you running ?

Hi Kwolf, I was wondering where were you from. Maybe I can help you to get the post ref.