Storkman
-
Posts
2,538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Storkman
-
nope. BWWWWWWAAAAAAAAAHHHHHAAAAAAAA!!!!!!!!!
-
Look at you're stock setup. Looks like it's set to display a circle.
-
In the CD switch 4 axis feedrates from inverse to UPM
-
if you mean node points, yes. its in the point drop down menu.
-
under config, toolpaths
-
looks like you're missing an end of line in the post.
-
What's your preferred X3 (or 4) color scheme?
Storkman replied to Joe788's topic in Industrial Forum
Setup like this: -
What's your preferred X3 (or 4) color scheme?
Storkman replied to Joe788's topic in Industrial Forum
quote: If you look at the the screen shots that people post here, some guys are running screens that look like a bad acid flashback.. You mean like this G? -
What's your preferred X3 (or 4) color scheme?
Storkman replied to Joe788's topic in Industrial Forum
Gradient is much easier on meh bloodshot eyes. -
There is 3rd party software that will work. IPX Vista
-
if it is a newer mpmaster, sounds like the safe index is turned on.
-
quote: I would think you would just use mill all the time. yup, if you program also. you can buy a seat of just design alot cheaper if you don't need to program.
-
opps, Rizzo as usual is probably right. I don't have X2 anymore.
-
there are 3 of them. open, save as, and merge.
-
click the open folder on the bottom left of the screen.
-
Way to keep a zipper lip boys.
-
The toolpath editor will do that. Or change at point in the chain manager.
-
quote: Yes you can create your wcs from solid face or create curve on edge and create wcs from geometryor just click rotate wcs
-
X4 here.
-
being from israel, you are probably using metric. move the mcamxm.config file instead of mcamx.config.
-
try taking the mcamx.config file out of the config folder. then restart mastercam.
-
alot of great minds here. (some a little deluded).^^^^^^ this is the best place to get help.
-
410/403 machines easily, one of the easiest machining stainless we use.
-
We substitute 403 for 410, but I don't know about 416.
-
Gcode, I run vista and only have that issue in the beta. Works fine in X3.