Jean-Simon
-
Posts
257 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jean-Simon
-
Je ne sais pas , nous sommes revendeurs de MC pour tout l'ouest de la riviere Richelieu donc on s'est peut-etre deja parle au telephone. Je m'occupe du support technique et de la formation. On se croisera ou parlera surement un jour. A plus! Jean-Simon
-
What I normally do is that I do it in two operations 1st rough pocket 2nd finish walls with contour lot less headhache. Ok it's 2 ops. but your tool is only gonna go to your retract or clearance plane and you'll have total control on your start point and lead-in/out.Hope it helps! Simon
-
Hey Cuda! d'ou es-tu ? Tu nous donnes pas beaucoup d'infos à ton sujet.
-
Help with chaining solids. No response trying to change start point
Jean-Simon replied to Bill K's topic in Industrial Forum
I really don't know what's wrong because i do exactly what you explained and sorry but i did worked and we run xp pro. Maybe rebooth or try on another file to make sure it's not the file wich is corrupted. Good luck! -
Only thing you need to do is to go in the control panel under folder option, view and desactivate hide extension for known files types. Hope it helped! Simon
-
Please post here if you are new to the Forum
Jean-Simon replied to Webby's topic in Industrial Forum
Hi! My name is Jean-Simon and I'm in Montreal working for CAP Technologies (distributor of MC) give trainings , tech. support and sales. Wish can help some of you guys. -
I use to work in tool & die too and i can tell you that we used different kind of toolings (sandvik, tageutek and valenite) and we had to adjust our feeds and speeds according with company. Ex.: we could use a 350 ft/min in D2 with tageutek and the inserts were lasting but with sandvik we needed to reduce to 275. I would tell you to refer to the company tech. data guide and start with about 80% and see. Sorry for lathe not enough exp. Hope it helped.