Plastmo
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Plastmo
-
Hey Todd, -relax, where is Your sence of humor.
-
********************************** X2 Update 1 The Update Manager in X2 will not work without applying Patch 1 for Mastercam X2. X2 Update 1 will be made available in December and will be distributed using the Update Manager. In order to receive X2 Update 1, X2 Patch 1 must have been installed. ************************************ You meen December 2007?
-
HSCo, bronz coated, 135 deg geo 2861 RPM, 1.8 IPM
-
Pete, one question: WHEN? Plastmo :-)
-
hey ToolMan184, +1 I've asked allredy this question couple days ago
-
how can i rename tool material in tool library, eg. "user def 1" to CARBIDE TiAlN? any sugestions?
-
link is not working
-
of course we have , but probably the best one you can take from your mastercam dealer; looks like you do not know any dealer
-
THAT IS IT than you Dos Man
-
hi fabriz in mcam9 it is very simple 1. go to nc utils, post proc, reverse 2. select g-code prog 3. save as nci 4. go to c-hoock; editnci 5. setup your tools, param, save 6. go to nc utils, backplot 7. mc9 file-no, select nci name just saved 8. backplot display, save as geometry 9. run backplot done just remember that geometry is created as tool center path, so offset geometry by tool rad for pockets
-
thanks Pete
-
Hi Roger I remember 4D Engineering from UK and revpost choock for mcam72, but this is history allredy.
-
Yeaaa?, - old, good animal. anyways, thank you Paul
-
NOOOO...BODY?
-
how can I run reverse post in X2 and recreate geometry? In Mcam9 it was very simple: 1. reverse post to nci file 2. edit nci 3. backplot nci 4. save as geometry done any sugestions?
-
Hi Brad Your 6mm dia hole tolerance is +0.04/+0.01
-
Hi What is the hole dia? F9 class tolerance is O.K. but the number depends on the size.
-
When I post the program in MC9, I have all my comments included in header of subprogram, but when I post the same toolpath in MCX, all comments in subprograms are mising. Post - Mpmaster from In House. Any sugestions?
-
Hi Clay, I am planning to buy new computer so, would You please tell me Your "sweet secret" what computer and configuration did You use before MCX release that every think was going smooth and good when You tested Mastercam X? Please, give me the brand, operating system, video card, RAM, etc. Plastmo :-)
-
Thad, thks for reply. I've tryed allredy this option, no effect. My b/color is 255. Andy
-
Two programers next to me that just installed MCX withouth taching anything, no sp1, no updates, no color change, nada, can print with NO PROBLEM AT ALL. Andy
-
After apdate 2 I can't print at all, totally! BLANK PAGES. I could before update. Anybody els with this problem?
-
No cos zjebales.
-
I would like to create tool table based on tool lenght register number - H#. Very important if You are using more tools than machine ATC tool pockets.
-
Thanks Iskander, You are the best.