Plastmo
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Plastmo
-
so, what for is that Metric Checkbox????
-
guys, change speed and feed on finish passes or on corner arc movement is the problem for CNC as old as mastercam
-
set your dynamic to 0-(unlimited) and memory 75%
-
same problem here
-
Uppps, I forgot, toolpath manager must be undocked
-
Ocean, of course I can use Alt+O but, this is not what I am looking for. I found samthing similar but not exactly. When You go to machine group properties/files/edit defaults then operation manager is minimized in bottom left corner, so CNC INC., could You PLS!! put that routine in to backplot and verify function?
-
do I really have to invest in new hardware to get functionality that was in MC9??
-
yes, minimized, but in the way of MC9-automaticaly when you start backplot
-
is it posible to have tool manager minimaized during backplot and verification, and after, back to previous size?? (like in ver MC9??)
-
Your scale factor is: 1/1.283=0.779423226
-
hey Matt, say hello to JJ_8
-
JJ_8, yes, 5 axis machining, if You"ve got operations located on opposite sides, like top and bottom; becouse mastercam can only create 5 axis toolpath in top orientation.
-
Gunther, THANK YOU
-
correction; tool is jumping after finish from retract to feed plane back and next to clearance
-
O.K. another bug try this: 1. dock your tool manager and make it approx 3/4 wide of your screen (situation if you have long comments) 2. select toolpaths to run backplot 3. start backplot and pause after 2-3 sec. do not exit backplot 4. make your toolpath manager approx 1/8 wide of your screen 5. try to rotate your model or geometry dynamicly
-
when selected retract and clearance then tool is jumping after finish from clearance back to retract and up to clearance
-
go to control def., NC Output, Enable post debug info.
-
Hi 1ft = 120 bytes, so 840 ft = 100800 bytes
-
do not start from ALT-C; install icon in toolbar and start from icon
-
Hi Colin If You answer this quastion: why did You change from DOS to windows?? You've got my answer. Graphic is graphic and thats why we've got Mastercam X2
-
Roger Martin and all of You Guys, if there is over 1000 pages of post referance, do'nt You think is time to release graphic,generic post and just include manual for that, 100 pages??
-
G43.1 or G43.4 is full 5 axis dinamic cutter lengh compensation. For 3D programming You gonna use G43 as normal. You've got to enter tool gauge to tool register and thats all. Do not forget to change pivot point lengh in Your post to 0. valu, becouse You are programming tool tip.
-
Hi Jeff pls specify if You wont to lock program editing at machine control or edit toolpath in mastercam file?
-
i do not know the way, but this is very good idea, lock toolpath with password
-
320m = 125984b