hi guys we have vericut fixed by CGTech technical support (excellent support)so now verification is showing correct tool movement, same as the machine. as I expected, control def. for G43.4 was modified. I could show video from verification but I do not know how to attached file to this post.

yes, but 5 axis G code is totally wrong, only 3 axis toolpaths are O.K. I do not know if this is my post or mastercam .

Hi guys is it possible import nci file from 5 axis toolpaths and reposted to nc code?

guys, G54.4P1 is no problem, we are using this function (Workpiece Setup Error Correction) in hundreds programs without any problem, we shift workoffset Z0 point using variable #5813 in program header #3200=3 #5223=#3212/100000 #5813=-5.4764(VISE Z)<<****************** G00G17G20G40G49G80G90 G91G28Z0. M1 (TOOLPATH ID2) N1T2T14M06(2" FLY-CUTTER) G54 M43 M46 G00G90A0.C0. M44 M47 G54.4P1 X9.4247Y-1.5846S10500M03 G43H2Z15. so, the real problem is G43.4 (tool tip point control) in vericut that did not show tool reposition when G43.4 is active.

Bob, you are absolutely right, so far I did not have the problem like that because at the beginning of using Mazak variaxis (3 years ago) I modified our mastercam Mazak post and vericat control to match machine control but, I always use furs tool change at 5axis milling and null tool change in mastercam, what happened last week was new young programmer and his believe that vericut is 100% accurate.

in the past we run hundreds programs in this mode and never had problems with G5P0 and G64, I check my programs in vericut and so far I did not have issue like that,

just to add, in vericut control, driven point zero and axis orientation should not be changed and rotated when G43.4 is active, but tool tip point control during rotation should be recalculated and vericut must show that. I tried to find macro for that and add to G43.4 spec. in control but so far no lack.

Joe788, I know wat happened and why, but I am looking for solution in vericut control file for mazatrol matrix to cutch the possibility of crash that happened.

guys, in vericut all options were set on, warnings,colision detection, travel limits ect. so fare we did not have any problems with vericut, this software is really excellent. crash happened because programmer did not forse tool change at null tool change when full 5 axis was running.

We cut the part running MAZAK VARIAXIS 630-5X-II with mazatrol matrix control. With G54.4P1 and G43.4H22 active, machine was cutting 5ax swarf toolpath and at null tool, machine rotated table and control recalculated tool position on X,Y and Z axis so machine moved on all axis, but in the program there is not linear axis move. We check the program in Vericut , but Vericut DID NOT show that recalculation and tool movement. HUGE CRASH!! $40,000 spindle. In the middle of the program! X-3.1284Y-7.2076Z4.2283A-90.718C266.016 X-3.1671Y-7.1783Z4.2125A-90.779C265.883 X-3.2092Y-7.1476Z4.1941A-90.855C265.745 X-3.2484Y-7.1819Z4.1987 X-3.2864Y-7.2152Z4.2122 X-3.3221Y-7.2464Z4.2343 X-3.3543Y-7.2746Z4.2643 X-3.3821Y-7.2989Z4.3013 X-3.4047Y-7.3187Z4.3441 X-3.4214Y-7.3332Z4.3915 X-3.4315Y-7.3421Z4.442 X-3.435Y-7.3451Z4.4941 G00Z8.1941 G5P0 G64 (TOOLPATH ID197) G00A-89.565C92.397<<***************** G00X3.0974Y-7.5283 G61.1 G5P2 Z4.2992 G01X3.0946Y-7.5247Z4.2471F125. X3.0866Y-7.5138Z4.1966 X3.0734Y-7.4961Z4.1492 X3.0554Y-7.472Z4.1064 X3.0334Y-7.4424Z4.0694 X3.0078Y-7.408Z4.0394 X2.9795Y-7.37Z4.0173 X2.9493Y-7.3295Z4.0038 X2.9182Y-7.2877Z3.9992 X2.8889Y-7.3159Z3.9927A-89.578C92.504F90. X2.8637Y-7.3427Z3.9865A-89.584C92.626 Does anybody have idea how to fix mazatrol matrix control to show this movement? Thanks,

couple whys: 1. why in tool manager mouse mid button + alt is steal dynamic pan, but in mastercam is changed to mid button + shift? 2. why in tool manager I can not activate dynamic tool projection ruler? 3. why in mastercam, when I start new file, mastercam is not link to default material library set in configuration file?

do not double click on mcx file; just single click and O.K.

Hi Guys in high speed dynamic area toolpath should I use G5 P2 (Mazak high speed) in the program or no? Thanks

Hi all corrupted tools. You have this problem becouse in old MC X file you changed machine group name; Mastercam X7 tool manager is working O.K. if your machine groupe is as defoult; for ex: Machine Groupe-1, Machine Groupe-2, so on: Machine Groupe-1 is in Mastercam X config as user defined, so in old files you have to change machine group name to this, but not manually; create new machine group with new name as defoult Machine Groupe-1 and copy and paist toolpaths from old machine to the new groupe

yea, i know, but i do not have internet on my mastercam workstation company restrictions

hi guys cruch mastercam X6 MU1?, no problema: toolpath, multiaxis-> curve 5 axis select tool select holder cut patern->3D curves->select->chain tool axis control->chain->select->chain colision control->on selected curve linking-> whatever roughing-BOOM!!!-YOU ARE OUT selekting parameters in order from top to bottom as logical way is not what you expect btw, mastercam X4 and X5 is O.K.

just draw the circle with rad 2. at intersection y axis and your big ciscle, then draw the line from that small circle centre to intercection with big one.

what i do: 1.turn all levels on 2.select toolpath 3.in toolpath manager select "only display associative geometry" 4.analize entity and you've got it

in X4 after editing material i could save it as new material to library, but in X5 it is not working; i can not save to library as new; well, X5 is showing save mesage but material is not there anybody seen that?