mirek1017
-
Posts
888 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by mirek1017
-
-
Hello All ,I am use generic VTL right turret machine def with mpfan postprocesor from MASTERCAM,COM web
When I use turning opetation everything working good ,all my g codes are positive numbers ,but when I am try use c axis drillng when I am posting all numbers are negative .I am add my zip to go file ,can someone can take look haw I can fixing this ?
Thank you for any helping
-
3 minutes ago, #Rekd™ said:
thank you ,so is not possible make on solid ?
-
3 minutes ago, #Rekd™ said:
Are you trying to make it tapered (big on one end and smaller on the other)?
yes
-
I have hard time for find out haw sweep some simple part ,I thing there is some setting on chain parramter?
-
Good morning All ,I have question ,we get some parts with angle packets on it
I want tot set up this part on my VF 11 machine use opti rough for rough all packet ,and I was thinking to order angle head for finish all off them
My question is ,how good the haas
is with the angle head calculation ,did this some special fixture on the control for use angle head ,did I need something extra from my mastercam reseller ,I should order angle head from HAAS or I can order from any company ?
thank you all for any help
4 minutes ago, mirek1017 said:Good morning All ,I have question ,we get some parts with angle packets on it
I want tot set up this part on my VF 11 machine use opti rough for rough all packet ,and I was thinking to order angle head for finish all off them
My question is ,how good the haas is with the angle head calculation ,did this some special fixture on the control for use angle head ,did I need something extra from my mastercam reseller ,I should order angle head from HAAS or I can order from any company ?
thank you all for any help
-
Thank you
-
Hello All ,when I can set this for defoutlts settings in my machine def ?
-
20 hours ago, crazy^millman said:
With surface finish contour it treats al single surfaces as a contour to go all the way around the surface. You have to either create a boundary or in the advanced section use only between surfaces. Surface normal become very important here they will control inside or outside cutting of single surface when surfaces are used and not solids. sometimes you have to flip them to get what should work to work. Use the direction to get the tool in and out of the cut.
You have a couple of things working against you on this file. #1 that should be one surface for each feature not split surfaces. #2 Need to define the cutting length of the tool correctly. It is defined wrong for the cutting length. Recheck that. #3 I like 2D dynamic to rough undercuts with. #4 Flow line will work by turning off all gouge checks where one surface becomes extreme important. #5 Dumb the model down. Not sure why you are not dumbing the model down to create this shape verse using surfaces.
To use Dynamic I had to add Point toolpaths to get the tool in and out of the operation. This is a situation where having more than one set of ref points would not make use use point to get in and out of the cut. I also had to use 3 operation since depth of cut will not go back to the center like ref points is doing. It would work with them, but
Attached is a link to the file with these changes and flowline added. See what happens when someone shares a file.
Run ,can you take look on my parallel toolpath ,I want to get clean nice toolpath for finish my side packets
-
14 minutes ago, crazy^millman said:
With surface finish contour it treats al single surfaces as a contour to go all the way around the surface. You have to either create a boundary or in the advanced section use only between surfaces. Surface normal become very important here they will control inside or outside cutting of single surface when surfaces are used and not solids. sometimes you have to flip them to get what should work to work. Use the direction to get the tool in and out of the cut.
You have a couple of things working against you on this file. #1 that should be one surface for each feature not split surfaces. #2 Need to define the cutting length of the tool correctly. It is defined wrong for the cutting length. Recheck that. #3 I like 2D dynamic to rough undercuts with. #4 Flow line will work by turning off all gouge checks where one surface becomes extreme important. #5 Dumb the model down. Not sure why you are not dumbing the model down to create this shape verse using surfaces.
To use Dynamic I had to add Point toolpaths to get the tool in and out of the operation. This is a situation where having more than one set of ref points would not make use use point to get in and out of the cut. I also had to use 3 operation since depth of cut will not go back to the center like ref points is doing. It would work with them, but
Attached is a link to the file with these changes and flowline added. See what happens when someone shares a file.
THE ONLY ONE !!!!!!!!AND NUMBER ONE !!!!!!!
Thank you Ron
-
26 minutes ago, CEMENTHEAD said:
I've cheated this before by making an opposite rad surface toolpath on the inside with the bottom of the tool, and let the back of the tool cut the part.
I'd load a picture but my "max total size" is set for 1.45 kB.
Can you post zip to go file ?
-
I am try flowline but didnt work
-
-
How I can get minimum lead out on my 2 3/8 *11 OD thred
I am set up on my Haas SL 20
-
-
-
-
17 minutes ago, CEMENTHEAD said:
so I am confused ,Tile on machine show NL 2500 the same like we haw ,but on title video show NL2500Y
-
31 minutes ago, AHarrison1 said:
What happens when you push the Y jog button.
I dont see a horizontal slide below the X axis slide. Those 2 slides would move together to create the Y movement.
I am try jog Y axis ,do not work
-
23 minutes ago, mirek1017 said:
thank you
what you think ?
-
1 minute ago, #Rekd™ said:
Look inside the machine, if it is a Y axis it will have live tooling. Also look at the tooling cupboard and see if they have live tool heads for it.
thank you
-
Good morning All ,I am new person in lathe world .we have this lathe cnc machine in our shop .This machine has live tooling option ?
How I can check this ?
thank you
-
1 minute ago, BehindYou said:
Did it work?
Hello ,I doo not have time yesterday ,I hope I can play today on it and I let you know
-
6 hours ago, BehindYou said:
Greetings @mirek1017
Before I go on,
Whatever you do in your post it's on your own responsibility.
Follow this steps and you will have output which you want, related with insert width for groove tools
1.
Create format statement if you don't have it already
fs2 25 1.4 1.2lt #Decimal, absolute, 4/3 trailing
2.
Create new variable:
fmt "Groove Insert Width = " 25 groove_width # Tool width for programming ( "Groove Insert Width = " you can change the name how ever you like)
3.
Go to pparameter$ postblock (there is one more way which doesn't require this)
add : if prmcode$ = 20102, groove_width = rparsngl(sparameter$, 4) # Capture insert width for grooving tools
make sure you will follow the order of the numbers (just to keep it tidy)4.
Go to ltlchg$ #Toolchange, lathe postblock
Search for Comment$ predefined variable,
now past this either above or under comment$ variable ( you decide)
if opcode$ = 103, sopen_prn, sline, groove_width, sline, sclose_prn, e$
what it will do is this
if opcode$ is equal to 103 (103 means Groove) print ( | value which is stored in the groove_width variable | ) new line ( e$ means new line)
other then that add new strings in your post
scomm_str : "("
scomm_end : ")"
sline : " | "
now this is our :
( | Groove Insert Width = 2.00 | )
( #6. Operation type - Plunge rough; also, chained grooves | )
just because I pasted if opcode$ = 103, sopen_prn, sline, groove_width, sline, sclose_prn, e$ above predefined comment$ variable
our output is before ( #6. Operation type - Plunge rough; also, chained grooves | )
This is your personal decision how you want it.
I hope this can help you.
If you need more help/information's feel free to contact me.
kind regards
Ivan.thank you I will try
-
1 hour ago, BehindYou said:
yes
I am use this generic post ,I can find this number parameter
[POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V25.00 P4 E1 W25.00 T1610375561 M25.00 I0 O10
scncpost_revision := "25.85" # Internal revision number for use by CNC Software only. Please do not change this number.
scustpost_revision := "0" # Revision number for use by Resellers or customers.
# Post Name : Mplfan.pst
# Product : LATHE
# Machine Name : GENERIC FANUC
# Control Name : GENERIC FANUC
# Description : GENERIC FANUC LATHE C-AXIS POST
# Mill/Turn : YES
# 4-axis/Axis subs. : YES
# 5-axis : NO
# Subprograms : YES
# Canned Cycles : YES
# Executable : mp.dll
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
#
# Associated File List$
#
# default.mcam-control
# LATHE DEFAULT.mcam-lmd
# LATHE DEFAULT MM.mcam-lmd
#
# Associated File List$
#
# --------------------------------------------------------------------------
VTL DRILLING
in Post Processor Development Forum
Posted
when I use drilling mastercam make plane top (top)1 (top )1
the late operation top lathe vtl
when I want to change the same planes for drilling I got this message