Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Michael Reynolds

Verified Members
 View Profile  See their activity

  • Posts

    659

  • Joined

  • Last visited

 Content Type 

Everything posted by Michael Reynolds

  1. Michael Reynolds
    Thanks, that worked!! Mike R.
  2. Michael Reynolds
    Exactly where do I find the new corner rounding milling cycle? TIA, Mike R.
  3. Michael Reynolds
    I like the long sleeve denum shirt option...... JMHO, Mike R.
  4. Michael Reynolds
    Thanks all, I tried all of them, but none would open my ug (v18) files. I kept getting a "schema incompatible" error message. Could this be because the files were saved under a unix platform, and I'm trying to open them under windows? TIA, Mike R.
  5. Michael Reynolds
    Thanks All! I just downloaded actifly (with the UG option), and I get a memory access violation. Any ideas on what I'm doing wrong? Or mabye it's 'cause it's a trial version? Thanks again!!! Mike R.
  6. Michael Reynolds
    Hhi Jay! It's a software that lets you look at part files from acis, parasolid, sat, etc. You can't manipulate geo, but it's a nice thing to be able to look at things. Here's the link: http://www.hoops3d.com/ C-ya! Mike R.
  7. Michael Reynolds
    Hi All! Does anyone know of a "part viewer" that will open native part files, such as Mcam and ug? Webby turned me on to hoops, but they don't open native files. Thanks in advance!! Mike R.
  8. Michael Reynolds
    Thanks guys! That certainly cleared it up for me! Mike R.
  9. Michael Reynolds
    What's the advantage of the slot milling toolpath over a pocketing routine? TIA, Mike R.
  10. Michael Reynolds
    And again, and again, and again............................................ (I mean no disrespect to you, RMS, it's just that if I had a nickel for everytime I've read about this problem (or had it), I'd be in Bora Bora now).. Mike R.
  11. Michael Reynolds
    I"ve posted this before, and it's the long way around it, but here's how I do it: open ms power point and insert the object. save it as a windows metafile open acad, insert the metafile, then save it as a dxf. Open mcam, and convert the dxf. There ya go!!!! HTH, Mike R.
  12. Michael Reynolds
    Yup, now that's a HANDY add on to mcam!!!!!! Mike R.
  13. Michael Reynolds
    I helped our Valanite rep out with testing different tool mat'ls, and CBN worked better than anything else. HTH, Mike R.
  14. Michael Reynolds
    How 'bout bobcam? Mike R.
  15. Michael Reynolds
    No, but I've got some stuff on MINNIE!!!!!!!!!!!! Mike R.
  16. Michael Reynolds
    Hi SAV! Not yet, our maint. dept. has yet to finish hooking it up.....they need the wiring diagrams from the manual to check out some stuff (I don't know squat about electrical stuff). I'll let you know as soon as it's fired up, though! Thanks again, dude! Mike R.
  17. Michael Reynolds
    Andrew, Thanks! I'll call him this week. James, Thanks very much for trying! I appreciate it just the same! (Nice beanie!!!!!!!!!) Mike R.
  18. Michael Reynolds
    Hi GCODE, Corey Station, Pensacola Gitmo, Cuba 2 MAW, NC 2681 (signals intelligence, communications) 1982-1986 What a great job!! Semper Fi, Mike R.
  19. Michael Reynolds
    Hey Gcode, Where were you stationed in the mc? What was your mos? Mike R.
  20. Michael Reynolds
    Will there be a V9.1 version of mcam, or does the SP download to that? TIA, Mike R.
  21. Michael Reynolds
    Hey CNC software, are you out there? Is this a possibility? Thanks in advance, Mike R.
  22. Michael Reynolds
    Mucho thankso James! That did the trick! Mike R.
  23. Michael Reynolds
    Hi All! Is it possible to recreate toolpath operations (in ops manager) from an nci file? I know I can backplot to see what was done, but can I recreate the toolpath ops? (I'm looking at a student's work, and he saved his file (to disk) without saving the toolpaths). Thanks all!! Mike R.
  24. Michael Reynolds
    I have to agree with CNCme, .X_T would be the best of all. I do this between UG and Mcam all the time, and things come in VERY clean. Mike R.
  25. Michael Reynolds
    Hey Trevor, I LOVE that saying - "ignorance does not necessarily represent stupidity". I just GOTTA use that in my classes!!!!!! Good one!! Mike R.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...